【Overview】

[] 1.5inch OLED Display Module, Embedded SH1107 Driver Chip, SPI / I2C Communication, Comes with examples for Raspberry Pi, Arduino, STM32, etc.

【Feature】

[] Ultra-narrow bezel, conpact size, with onboard voltage translator

[] Adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate

[] Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)

【Specifications】

[] OPERATING VOLTAGE : 3.3V / 5V

[] DISPLAY PANEL : OLED

[] RESOLUTION : 128 × 128 pixels

[] PIXEL SIZE : 0.185 × 0.185mm

[] COMMUNICATION INTERFACE : 4-wire SPI / I2C

[] DRIVER : SH1107

[] DISPLAY SIZE : 26.855 × 26.855mm

[] MODULE SIZE : 38.50 × 44.50mm

【Control Interface】

[] VCC : Power (3.3V / 5V input)

[] GND : Ground

[] DIN : Data input

[] CLK : Clock input

[] CS : Chip selection, low active

[] DC : Data/Command selection (high for data, low for command)

[] RST : Reset, low active

【Hardware Connection】

[] Connecting With Raspberry Pi Via SPI Interface

[] Connecting With Arduino Board Via SPI Interface

【Usage Example】

[] for reference only, the STM32 board is NOT included.

【Outline Dimensions】

[] 1.5inch OLED Module (B) x1

[] GH1.25 7PIN cable x1

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com