Overview

• This is a general GNSS module which supports Multi-GNSS systems:
• GPS, BDS, and QZSS, with advantages such as fast positioning, high accuracy, low power consumption, and so on.

   Features

• Supports GPS, Beidou (BDS), GLONASS and QZSS multiple satellite systems
• Built-in Low Noise Amplifier (LNA) to Improve Receive Sensitivity
• Built-in Surface Acoustic Filter (SAW Filter) for enhanced noise cancellation performance
• Support AGNSS function
• Support 1PPS function
• UART communication baudrate: 4800~115200bps (9600bps by default)
• Onboard rechargeable Li battery MS621FE, for preserving ephemeris information and hot starts
• 2x LEDs for indicating the module working status
• Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

   L76K Specifications

• GNSS : GPS/GLONASS/BDS/QZSS
• Chip : AT6558R
• L1 receiver type Channels : 32 tracking ch, 72 acquisition ch
• L1 receiver type SBAS : Not support
• A-GNSS : Support
• Sensitivity (Acquisition): -148dBm
• Sensitivity (Re-acquisition): -160dBm
• Sensitivity (Tracking) : -162dBm
• TTFF (Time to First Fix) cold start : 30s, Autonomous   /   5.5s, With AGNSS
• TTFF (Time to First Fix) Hot Start : 2s
• Position accuracy : 2.0m CEP
• Speed accuracy : 0.1m/s
• Max acceleration : 0.1m/s²
• Timing accuracy : 30ns
• Update Rate (Max) : 5Hz
• Default baudrate : 9600bps

Comes with development resources and manual examples for Raspberry Pi/Arduino/STM32. Development integration is more convenient, scalability

Supports GPS, BeiDou (BDS), GLONASS and QZSS multiple satellite systems

• VCC : Power supply (3.3V/5V input)
• GND : Ground
• TX : Connect to MCU.RX (signal direction: TX >> MCU.RX)
• RX : Connect to MCU.TX (signal direction: MCU.TX >> RX)
• PPS : GPS status indicator

   Video

1. L76K GPS Module x1
2. PH2.0 5PIN wire x1