Raspberry Pi 7.3inch e Paper HAT e Ink Display Module resolution SPI for Arduino/STM32/Jetson Nano

Raspberry Pi 7.3inch e Paper HAT e Ink Display Module resolution SPI for Arduino/STM32/Jetson Nano

$70

Brand：Spotpear

SKU：0201159

Date：2022-11-11 17:35

Part Number：

7.3inch-e-Paper-(F) 7.3inch-e-Paper-HAT-(F)

No：

- +

In Stock

Buy It Now

Add to cart

Ask a Question

Copy Link

Raspberry Pi 7.3inch e-Paper HAT e-Ink Display Module 800 × 480 resolution SPI for Arduino / STM32 / Jetson Nano

7.3 e-Paper

7.3inch e-Paper (G)

7.3inch e-Paper (E)

7.3inch e-Paper (F)

Note: Do not include Raspberry Pi and Jeston Nano, Please Buy alone.

Features

Advanced Color ePaper (ACeP) technology, supports 7-Color display
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Comes with development resources and manual
(examples for Raspberry Pi / Arduino / STM32 and Drive board schematic)
e-Paper HAT:
Onboard voltage translator, compatible with 3.3V / 5V Level interface
SPI interface, for connecting with controller boards like
Raspberry Pi / Jetson Nano / Arduino / STM32, etc.

Specifications

e-Paper OPERATING VOLTAGE: 3.3 V
e-Paper HAT OPERATING VOLTAGE: 3.3V / 5V
OUTLINE DIMENSIONS: 170.2 × 111.2mm
INTERFACE: 3-wire SPI、4-wire SPI
DISPLAY SIZE: 160 × 96mm
DOT PITCH: 0.2 × 0.2mm
RESOLUTION: 800 × 480 pixels
DISPLAY COLOR: ACeP 7-Color
GREY SCALE: 2
FULL REFRESH TIME: 35s
REFRESH POWER: < 49.4mW(typ.)
STANDBY CURRENT: <0.01uA (almost none)
VIEWING ANGLE: > 170°

Advantages Of EINK

E-Paper Display Utilizes Microcapsule Electrophoretic Technology For Displaying, The Principle Is: Charged Particles Suspended In Clear Fluid Will Move To Sides Of Microcapsule When Electric Field Is Applied, Making The Microcapsule Become Visible By Reflecting Ambient Light, Just As Traditional Printed Paper.
E-Paper Display Will Clearly Display Images/Texts Under Lamplight Or Natural Light, Requires No Backlight, And Features Nearly Up To 180° Viewing Angle. It Is Usually Used As E-Reader Due To Its Paper-Like Effect.

Raspberry Pi 40PIN GPIO Compatibility

Designed For Raspberry Pi Boards / Jetson Nano

SPI Control Interface

For Use With Controller Boards Like Raspberry Pi / Jetson Nano / Arduino / STM32

VCC	3.3V / 5V
GND	GND
DIN	SPI MOSI pin
CLK	SPI SCK pin
CS	SPI chip select pin (active low)
DC	Data/command control pin (high for data, low for command)
RST	External reset pin (low reset)
BUSY	Busy state output pin