【Overview】

[] LTE CAT-1 HAT FOR RASPBERRY PI, Enabling LTE Cat-1 / 2G Communication & LBS Positioning, Based on A7670E.

【Features】

[] The A7670E Cat-1 HAT is an LTE Cat-1 module, which supports wireless communication modes including LTE-TDD, LTE-FDD, GSM, GPRS and EDGE, with up to 10Mbps downlink rate and 5Mbps uplink rate. It supports Windows/Linux operating systems and multiple network protocols. The module size is the same as SIM7000/SIM7070 series, and the AT commands is mostly compatible with SIM7600 series. It is suitable for IoT applications like remote information processing, monitoring devices, POS, industrial routers, remote diagnosis, and so on.

[] Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards

[] Supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL

[] Supports dial-up, telephone call, SMS

[] Supports LBS base station positioning, it is able to get the approximate position info via mobile network

[] TTS (Text To Speech) feature, texts in Chinese/English can be converted into spoken words

[] Onboard USB interface, for testing AT Commands, network communication, and so on

[] Onboard audio jack for sound recording, making telephone call, listening the TTS resulting speech, etc.

[] Breakout common used control pins of the A7670X module, make it easy to connect with hosts boards like Arduino/STM32

[] SIM card slot, supports 1.8V/3V SIM card

[] 2x LED indicators, easy to monitor the operating status

[] Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper

[] Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

【Specifications】

FREQUENCY BAND：

[] LTE Cat-1：LTE-FDD: B1, B3, B5, B7, B8, B20

[] 2G：GSM/GPRS/EDGE: 900/1800 MHz

SMS AND AUDIO：

[] SMS：

Supported types: MT, MO, CB, Text, PDU

Storage: USIM card (CB couldn't be stored on SIM card)

[] Audio feature：Standard 3.5mm audio jack for audio input/output

OTHER：

[] Power supply：5V

[] Operating voltage：5V / 3.3V (configured via jumper)

[] Operating temperature：-30°C ~ 80°C

[] Storage temperature：-45°C ~ 90°C

[] Dimensions：65 × 30.5mm

【Standard Raspberry Pi 40PIN GPIO】

[] Compatible With Raspberry Pi Series Boards

【Dial-Up On Windows/Linux】

[] LTE Cat-1: Up To 5Mbps (Uplink) / Up To 10Mbps (Downlink) *

[] EDGE: Up To 236.8Kbps (Uplink / Downlink) *

[] GPRS: Up To 85.6Kbps (Uplink / Downlink) *

【Pinout Definition】

【Dimensions】

[] A7670E-Cat-1-HAT

1. A7670E-Cat-1-HAT x1

2. LTE Antenna x1

3. USB-A to USB-C cable x1

4. RPi screws pack x1

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com