【Overview】

[] Jetson Orin

[] Uninterruptible Power Supply (UPS) module

[] Supports simultaneous charging and discharging, and can monitor battery operating status through the I2C interface

【Features】

[] It adopts spring pin interface design and is suitable for Jetson Orin series motherboards.

[] Onboard lithium battery charging chip supports dynamic path switching and more stable power supply.

[] Can communicate through I2C interface, measure battery voltage, current, power and remaining power and other parameters, and detect module working status in real time.

[] Onboard battery protection circuit, anti-overcharge, anti-over discharge, anti-overcurrent, anti-short circuit and anti-reverse connection indicator light, balanced charging, stable and safer operation.

[] Onboard 3 21700 lithium batteries can maintain longer standby time.

[] Provide complete supporting data manual

Specifications

OUTPUT VOLTAGE	Same as the input voltage when there is power input; Equals the battery voltage (9V~12.6V) when there is no power input.
INPUT VOLTAGE	15V~19V
CONTROL BUS	I2C
DIMENSIONS	100 × 79 mm
BATTERY SUPPORT	21700 Li battery × 3 (in series, NOT included)
MOUNTING HOLE SIZE	2.5mm

【Simultaneous charging and discharging】

[] Uninterruptible power supply

[] When connected to an external power source, it will simultaneously power the system and charge the lithium battery

[] When disconnected from the external power source, it will automatically switch to lithium battery power supply without affecting the normal operation of the system

for reference only, please check the Package Content section for the detailed part list

【Dynamic path switching, more stable power supply】

[] When the input power is connected, the battery output is disconnected, and the input power will charge the system and the battery at the same time, with a maximum charging current of about 1.33A.

[] When the battery is fully charged, it will be disconnected. When the battery voltage is lower than 12V, it will be recharged to avoid frequent charging and discharging of the battery, which will damage the battery life.

[] When the input power is disconnected, it will automatically switch to lithium battery power supply, which will not affect the normal operation of the system.

【Product Suitability】

[] Screw holes compatible with Jetson Orin Nano and Jetson Orin NX

【Real-time detection module working status】

[] It can communicate through the I2C interface to measure parameters such as battery voltage, current, power, and remaining power.
[] When the voltage is detected to be too low, the program can be used to control Jetson Orin to save data before shutting down.
[] This can prevent data loss due to sudden power failure of Jetson Orin.

【Safe and stable circuit design】

[] Onboard battery protection circuit, anti-overcharge, anti-over-discharge, anti-overcurrent, anti-short circuit and anti-reverse connection indicator lights

[] Balanced charging, stable and safer operation

【Spring ejector pin interface design】

[] Applicable to Jetson Orin series motherboards

[] Communication can be done through the I2C interface without affecting access to other expansion boards

【Interface Definition】

【Size】

[] UPS Power Module (C)【No Battery】

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com