• sales

    +86-0755-88291180

Orange Pi Zero ABS Case User Guide

   Note

  • This black case is only suitable for the OrangePi Zero.
  • Not applicable to OrangePi Zero2 and other development boards ! ! !

   Overview

  • This product is a special box for the Orange Pi Zero development board + expansion board, using environmentally friendly ABS material.
  • Small body, fine workmanship, precise hole position, seamless combination, with fences on the side, better heat dissipation.
  • Simple design and easy installation.

   Features

  • Product Name: Orange Pi Zero ABS Case
  • Model: Orange Pi Zero Case
  • Material: Environmentally friendly ABS
  • Colour: Black
  • Dimensions: 56mm x 51mm x 36mm

   Picture



TAG: Pi5 Pure-Copper Active Cooler Circular LCD Screen USB Binocular Camera 2MP OS02G10 Distortion Free Binocular Synchronous Frame USB 2.0 Plug and Play CSI Camera Raspberry Pi Finger Vein Scanner Module (A) Cortex M4F UART 3.3V TTL UL94-5VB IP56 Better Than Fingerprint Recognition Digital Photo Frames Sensor SeeedStudio SenseCAP Watcher Clear Enclosure Camera AI ESP32-S3 Himax WiseEye2 HX6538 AI Agent Raspberry Pi 5 Audio Jack DDSM400 Direct Drive Servo Motor All-In-One Design Hub Serial -LIN Bus Motor ESP32-Hi Mechanical Dog ESP32 C3 Servo AI Voice Chat Development Board Deepseek RISC-V RS232 to CAN NanoKVM-Lite Raspberry Pi Pico 2 RP2350B 2.41 inch AMOLED Development Board QSPI Display TouchScreen 450x600 RM690BO FT6336 QMI8658 EyeLink-RC-S1 Industrial Edition 5.5 inch Touchscreen Camera R1M Card Recording Flight Controller FPV Drone ground station image transmission remote USB Camera 12MP IMX563 USB 2.0 Dual-Axis OIS Autofocus Industrial Modbus RTU RS485 4-ch Relay With isolation protection and guide rail Arduino 0.96inch RGB OLED