• sales

    +86-0755-88291180

ESP32-S3 Industrial 8-Channel Controller with WiFi Bluetooth CAN IoT RS485 and RJ45 ETH POE

$42.9

Brand:SpotPear
SKU:020309400000
Date:2025-08-07 11:55
Part Number:
No:
In Stock

ESP32-S3 Industrial Control Board Industrial-grade 8-channel digital input/output controller Built-in Xtensa 32-bit LX7 dual-core processor with a main frequency of up to 240MHz Onboard multiple isolation protection circuits


ESP32-S3 Industrial Control Board
Industrial-grade 8-channel digital input and output controller

Based on ESP32-S3 master control, supports Wi-Fi, Bluetooth, RS485, CAN and Ethernet interfaces

Built-in power isolation, optocoupler isolation and other protection circuits, safer, more stable and more reliable


Product Features

  • Based on the ESP32-S3 microcontroller, it has a built-in Xtensa 32-bit LX7 dual-core processor with a main frequency of up to 240MHz.
  • Integrated 2.4GHz Wi-Fi and Bluetooth 5 Low Energy (LE) dual-mode wireless communication for excellent RF performance
  • The output adopts Darlington tube with optocoupler isolation, which has stronger driving capability, the sink current can reach 500mA, and has built-in freewheeling diode protection.
  • The switch input has bidirectional optocoupler isolation, supports passive and active switch input, and the digital output supports switch input linkage mode control
  • Onboard isolated RS485 interface, convenient for external access to various RS485 Modbus industrial expansion modules or sensors
  • Onboard isolated CAN interface for easy access to various CAN devices
  • Onboard pin header allows connection to other devices
  • Onboard USB Type-C interface, which can be used for power supply and download debugging, making it convenient for development and use
  • Onboard terminal block power supply interface supports a wide voltage range of 7V ~ 36V, convenient for industrial power supply use
  • Onboard RTC clock chip, supports scheduled tasks
  • Onboard W5500 Ethernet chip, expands 10/100Mbps network connection through SPI interface
  • Onboard PoE module to realize Ethernet power supply function (compliant with IEEE 802.3af standard)
  • Onboard optocoupler isolation to prevent external circuits from interfering with the control chip
  • Onboard digital isolation to prevent external signals from interfering with the control chip
  • Onboard integrated power isolation can provide stable isolation voltage, and no additional power supply is required for the isolation end
  • Onboard Micro SD card slot, can be connected to an external SD card to store pictures or files
  • Onboard buzzer, RGB colored lights, power indicator, RS485 transceiver indicator and CAN indicator make it easy to perceive the operating status of the device
  • Guide rail type protective shell, easy to install and use, safer with shell


Product Parameters

modelESP32-S3-POE-ETH-8DI-8DO
microcontrollerESP32-S3
(The default module is ESP32-S3-WROOM-1U-N16R8, which can be customized)
Wireless Communications2.4GHz Wi-Fi (802.11 b/g/n)、Bluetooth 5 (LE)
USB portInterface formUSB Type-C
Supply voltage5V
FunctionDevice power supply, USB communication, firmware download, etc.
Isolated RS485 communication interface
Interface formTerminal Blocks
Direction controlAutomatic control via master hardware flow settings
Interface protectionProvides TVS tube protection, surge and electrostatic protection
Matching resistorDefault is NC, 120R matching resistor is reserved, jumper cap can be used to enable
Isolated CAN communication interface
Interface formTerminal Blocks
Direction controlHardware automatically determines and controls the direction of data transmission
Interface protectionProvides TVS tube protection, surge and electrostatic protection
Matching resistorDefault is NC, 120R matching resistor is reserved, jumper cap can be used to enable
Network portPoE network port, supporting IEEE 802.3af standard
Digital outputOutput channels8-way
Input voltage range5V ~ 40V
Output TypeOpen-drain output, output load 500mA/channel (MAX)
Isolation TypeOptocoupler Isolation
Digital InputNumber of input channels8-way
Input voltage range5V ~ 36V
Input TypePassive input / active input (NPN type or PNP type)
Isolation TypeBidirectional optocoupler isolation
indicator lightRGBColorful cool lamp beads, customizable display color
PWRPower indicator light, when connected to USB, it will light up red when voltage is detected
TXDTransmit indicator: lights green when data is being sent from the RS485/CAN interface.
RXDReceive indicator: lights up blue when data is received from the RS485/CAN interface.
Terminal power supplyPower supply range7V ~ 36V
Product AppearanceshellRail type protective housing
size175 × 90 × 40 (mm)

Based on ESP32-S3

Designed specifically for the AIoT market

Equipped with an Xtensa 32-bit LX7 dual-core processor running at up to 240MHz, it boasts powerful AI computing capabilities and secure encryption mechanisms. It also integrates 2.4GHz Wi-Fi and Bluetooth 5 (LE) dual-mode wireless communication.

Onboard multiple isolation protection circuits

Multiple protections, safer and more reliable to use

Digital input fully isolated

Digital inputs and outputs are fully isolated, with built-in bidirectional optocouplers.

Supports both passive and active inputs (PNP or NPN).


Digital output fully isolated

Darlington tube open-drain output, single-channel sink current up to 500mA, can directly drive relays


Application Scenario

Support RS485, Bluetooth or Wi-Fi remote control


Support Arduino, convenient for secondary development

Complete SDK and open source tutorials are provided to make it easy to get started and can be quickly embedded into applications.



Onboard PoE module

Only one network cable is needed to connect to the PoE device to achieve networking and power supply


The picture is for display only. This product does not include the switch in the picture



Example Demo

The sample code provides various combinations, including the Waveshare.cloud IoT connection demo and data visualization using the lightweight MQTT protocol.


Resource Introduction


  1. ESP32-S3-WROOM-1U-N16R8

    Powered by the ESP32-S3 series chip, the Xtensa dual-core 32-bit LX7 processor (with 16MB Flash and 8MB PSRAM).

  2. W5500

    Expand 10/100Mbps network connection through SPI interface

  3. Reset button
  4. Micro SD card slot

    Support external SD card to store pictures and files

  5. Power Module
  6. Bidirectional optocoupler isolation
  7. CAN converter chip
  8. Onboard TVS (Transient Voltage Suppressor)

    Can effectively suppress surge voltage and transient spike voltage in the circuit

  9. Optocoupler isolation and digital isolation

    Avoid external circuit interference with the control chip

  10. RS485 conversion chip
  11. Darlington tube

    Sink current up to 500mA, built-in freewheeling diode protection

  12. Power isolation

    Provides stable isolation voltage, no additional power supply required for the isolation end

  13. Digital output terminal
  14. buzzer
  15. TCA9554PWR

    Expansion IO for controlling digital outputs

  16. RTC battery connector
  17. Power isolation

    Provides stable isolation voltage, no additional power supply required for the isolation end

  18. Digital input terminal
  1. Power terminal blocks

    Supports DC 7V~36V wide voltage range power supply

  2. External antenna connector

    SMA female antenna mount for Wi-Fi and Bluetooth wireless communications

  3. Network port
  4. PoE Module

    PoE network port, supporting IEEE 802.3af standard

  5. USB Type-C port

    Can be used for device power supply, firmware download and USB communication

  6. WS2812 RGB LED
  7. BOOT button
  8. Working indicator light

    PWR: Power indicator
    RXD: RS485 / CAN receiving indicator
    TXD: RS485 / CAN send indicator

  9. Pin header

    Can be connected to other devices

  10. USB Type-C external power pin header

    Can be used to supply power via USB Type-C

  11. Multifunctional terminals
  12. Multi-function terminal level switching pin header

    The communication level and output voltage on the multi-function terminal are realized by switching this terminal

  13. CAN communication interface

    Supports connection to external CAN devices

  14. CAN matching resistor

    Reserve 120R matching resistor, which can be enabled by jumper cap

  15. RS485 communication interface

    Supports connection to external RS485 devices

  16. RS485 matching resistor

    Reserve 120R matching resistor, which can be enabled by jumper cap


Shell design

DIN-rail protective housing, supports 35mm standard DIN-rail, easy to install


Product size