• sales

    +86-0755-88291180

ESP32-Audio-Kit User Guide

ESP8266 & ESP32 User Guide


Note: This page mainly uses AT commands to develop wifi modules. 


一. STM32 project example of ESP8266 

AT command project: STM32AT command project of ESP8266

Instructions for use document: unzip the project compression package to obtain

Tencent Cloud AT Command Control Light Project: stm32 docking with Tencent Cloud Control Light.zip

Ali Feiyan AT command light control project: STM32 Ali Feiyan AT command light control project of ESP8266 


二. Smart configuration example (Smartconfig) 


Description: Use two methods for network distribution, Espressif ESP-Touch and WeChat Airkiss.

Preparation: 1 NodeMCU or ESP8266 wifi module, ESP-Touch APP Android IOS

手机APP源码:https://github.com/EspressifApp/EsptouchForAndroid.git & https://github.com/EspressifApp/EsptouchForIOS.git


Method 1:ESP-Touch


1,AT+CWMODE=1    !!Configure the WiFi module to work in single STA mode, and save the configuration in flash

2,AT+CWAUTOCONN=1    !!Enable automatic connection to AP after power-on 

3,AT+CWSTARTSMART=3   !!Support ESP-Touch and Airkiss intelligent distribution network 

4,Connect the mobile phone to the AP that needs network configuration, open the mobile APP ESP-Touch, enter the password, click OK, and wait for the network configuration to succeed, as shown in Figure 1. 


         Figure 1

5,AT+CWSTOPSMART     !!Regardless of whether the network configuration is successful or not, it is necessary to release the memory occupied by the quick connect, as shown in Figure 2 

6,AT+CIPSTATUS      !!Query network connection status 


            Figure 2 


Method 2:Airkiss


1,AT+CWMODE=1     !!Configure the WiFi module to work in single STA mode, and save the configuration in flash 

2,AT+CWAUTOCONN=1     !!Enable automatic connection to AP after power-on

3,AT+CWSTARTSMART=3    !!Support ESP-Touch and Airkiss intelligent distribution network 

4,Open WeChat, follow the WeChat public account "Anxinke Technology", click wifi configuration, click start configuration, enter the password, click connect, see Figure 3 


        Figure 3 

5,AT+CWSTOPSMART     !!Regardless of whether the network configuration is successful or not, it is necessary to release the memory occupied by the quick connect 

6,AT+CIPSTATUS       !!Query the network connection status, as shown in Figure 4 


          Figure 4 


三. HTTP


1,AT+GMR      !!Start querying version information 

AT version:1.2.0.0(Jul 1 2016 20:04:45)

SDK version:1.5.4.1(39cb9a32)

Ai-Thinker Technology Co., Ltd.

Integrated AiCloud 2.0 v0.0.0.5

Build:1.5.4.1 Mar 24 2017 11:06:56

OK

2,AT+CWMODE_DEF=1    !!Configure the WiFi module to work in single STA mode, and save the configuration in flash 

OK

3,AT+CWJAP_DEF=“newifi_F8A0”,“anxinke123” !!Connect Network 

WIFI CONNECTED

WIFI GOT IP

OK

4,AT+CWAUTOCONN=1    !!Enable automatic connection to AP after power-on

OK

5,AT+CIPSTART=“TCP”,“183.230.40.33”,80 !!connect to the server

CONNECT

OK

6,AT+CIPMODE=1                !!Set up transparent transmission 

OK

7,AT+CIPSEND                 !!Start sending 

OK

8,> GET

GET /devices/5835707 HTTP/1.1

api-key: xUrvOCDB=iRuS5noq9FsKrvoW=s=

Host:api.heclouds.com

\r\n\r\n(END)  

Respond to :

HTTP/1.1 200 OK

Date: Tue, 09 May 2017 01:21:06 GMT

Content-Type: application/json

Content-Length: 213

Connection: keep-alive

Server: Apache-Coyote/1.1

Pragma: no-cache

{“errno”:0,“data”:{“private”:false,“protocol”:“EDP”,“create_time”:“2017-05-06 12:51:52”,“online”:false,“location”:{“lon”:0,“lat”:0},“id”:“5835707”,“auth_info”:“Light001”,“title”:“SLight”,“tags”:[]},“error”:“succ”}

9,>POST

POST /devices/5835707/datapoints HTTP/1.1

api-key: xUrvOCDB=iRuS5noq9FsKrvoW=s=

Host:api.heclouds.com

Content-Length:60

\r\n

{“datastreams”:[{“id”:“switch”,“datapoints”:[{“value”:1}]}]}|(END)

Respond to:

HTTP/1.1 200 OK

Date: Tue, 09 May 2017 01:28:42 GMT

Content-Type: application/json

Content-Length: 26

Connection: keep-alive

Server: Apache-Coyote/1.1

Pragma: no-cache

{“errno”:0,“error”:“succ”}

10, +++                     !!Exit transparent transmission, do not check the new line (\r\n) 


三.STA+connect TCP Server


1,AT+CWMODE_DEF=1                !!Work in a single station module, save the setting parameters to the flash 

2,AT+CWJAP_DEF=“newifi_F8A0”,“anxinke123”   !!Connect to the router and save to flash 

3,AT+CIPSTART=“TCP”,“192.168.99.217”,6001   !!Connect to the TCP server, this experiment uses the network debugging assistant to test 

4,AT+CIPSEND=5                  !!Method一:Send data of the specified data length (Data: test1), see Figure 1


     Figure 1

5,AT+CIPMODE=1                  !!Method二:Use transparent transmission mode to send data 

6,AT+CIPSEND                   !!send data(Data:Test2),Figure 1:

7,Sent:+++                   !!Exit transparent transmission and send three consecutive +++, do not check the new line (\r\n), as shown in the figure below: 


8,After exiting successfully, you can send AT command                   !!See below :