• sales

    +86-0755-88291180

Raspberry Pi Pico-2CH-RS485 User Guide

Overview

This is a 2-Channel RS485 module for Raspberry Pi Pico, SP3485 transceiver, UART To RS485

Features

  • Standard Raspberry Pi Pico header supports Raspberry Pi Pico series
  • Using UART bus, easily converting UART to RS485 or vice versa

Specification

  • Operating voltage: 3.3V
  • Communication bus: UART
  • RS485 transceiver: SP3485
  • Baudrate: 300~500000bps

Pinout


Hardware connection

When connecting PICO, please pay attention not to connect in the opposite direction. The direction can be judged by observing the USB screen printing end of the module and the USB interface end of the Pico (also can be judged by the pin label of the platoon master on the module and the pin label of the Pico).
You can also wire it according to the table below

RS485PicoDescription
VCCVSYSPower input
GNDGNDGround
TX_CH0GP0UART transmit pin
RX_CH0GP1UART receive pin
TX_CH1GP4UART transmit pin
RX_CH1GP5UART receive pin

Connection

The connection of the RS485 board is same as the Pico-2CH-RS232

Setup environment

To setup the Pico for working, please refer to the official guide: https://www.raspberrypi.org/documentation/rp2040/getting-started/

Download example

Open a terminal and run the follow command

sudo apt-get install p7zip-full
cd ~
sudo wget  https://www.waveshare.com/w/upload/9/94/Pico_2CH_RS485.7z
7z x Pico_2CH_RS485.7z -o./Pico_2CH_RS485
cd ~/Pico_2CH_RS485
cd c/build/

Run the examples

C codes

  • Go the example directory and build it
cd ~/Pico_2CH_RS485/c/

Create the build folder and add SDK path to it:
By default, the ../../pico-sdk is the path of SDK
We have created the build folder in examples, you can just enter it.
Note: If the actual path of your Pi is different, you need to write the correct path.

cd build
export PICO_SDK_PATH=../../pico-sdk

Run the cmake to generate Makefile file

cmake ..

Run the make command to build the codes and generate an executable file.

make -j9

After building, an uf2 file is generated. Press and hold the key on the Pico board to connect the Pico to the Raspberry Pi's USB port via the Micro USB cable, then release the key. Once connected, Raspberry will automatically recognize a removable disk (RPI-RP2). Copy the file main.uf2 in the corresponding folder to the recognized removable disk (RPI-RP2).

cp main.uf2 /media/pi/RPI-RP2/

Python codes

Run in Raspberry Pi

  • Hold the BOOTSET key of the Pico board, then connect the Pico to Raspberry Pi by USB cable, then release the key.
  • Once the removable disk (RPI-RPI2) is recognized, copy the rp2-pico-20210418-v1.15.uf2 file to pico.
  • Open the Thonny IDE in Raspberry Pi, update it if it doesn't support Pico
  • Configure the port by choosing MicroPython(Raspberry Pi and ttyACM0 port) in Tools -> Options... -> Interpreter


If your Thonny doesn't support Pico, you can update it with the following command:

sudo apt upgrade thonny
  • Choose File->Open...->python/ and select the corresponding .py file to run the codes
TAG: RS485 TO ETH (B) Connect Alibaba Cloud And EMQX spotpear DeepSeek AI Voice Chat ESP32 S3 Development Board 2.06-inch AMOLED Display 410×502 2.06inch TouchScreen Programmable Watch LuckFox SC3336 Raspberry Pi 5 PCIe to M.2 5G/4G/3G HAT With RM520N-GL Sipeed Lichee Tang Nano1K FPGA MINI Development Board GW1NZ-1 Development Board Raspberry Pi 10.85 inch e-Paper ink screen display black white 1360×480 For Arduino /Jetson /STM32 /ESP32 Pi5 TOF Time of Flight Laser Range Sensor Mini Radar module UART Serial / I2C Port For Arduino / Raspberry Pi / ESP32 Industrial Isolated 4CH RS485 TO POE ETH (B) RJ45 Converter UART For Modbus HDMI to TTL USB To CAN Supports 6V~24V Solar Panel ADXL354CEZ AV to LVDS RS485 to Ethernet Industrial Isolated USB TO 4CH RS485 (B) Converter UART CH344L For Wall/Rail-Mount ESP32 IR Thermal Imaging Camera Milk-V Duo