• sales

    +86-0755-88291180

Jetson Nano IMX219-77 Camera User Guide

Introduction

IMX219 Camera, 800 megapixels and 77 FOV. Compatible with Jetson nano. You can also use it with CM3/CM3+ expansion boards like Raspberry Pi Compute Module IO board, Compute Module IO Board Plus, Compute Module POE Board of Waveshare and the StereoPi board.

Hardware connection

  • Connect the camera to CSI interface of Jetson Nano.Set the metal side of FFC into Heat-sink
  • Connect a HDMI LCD to Jetson Nano

Software setting

  • Power on Jetson Nano and open the Terminal (Ctrl+ALT+T)
  • Test camera with command:
DISPLAY=:0.0 gst-launch-1.0 nvarguscamerasrc ! 'video/x-raw(memory:NVMM), width=3280, height=2464, format=(string)NV12, framerate=(fraction)20/1' ! nvoverlaysink -e
  • If you find that the image captured is red. You can try to download .isp file and installed:
wget https://www.waveshare.com/w/upload/e/eb/Camera_overrides.tar.gz
tar zxvf Camera_overrides.tar.gz 
sudo cp camera_overrides.isp /var/nvidia/nvcam/settings/
sudo chmod 664 /var/nvidia/nvcam/settings/camera_overrides.isp
sudo chown root:root /var/nvidia/nvcam/settings/camera_overrides.isp


TAG: ESP32-S3 1.69inch LCD Display With QST Attitude Gyro Sensor QMI8658C For Arduino Python EyeLink-RC-S1 Industrial Edition 5.5 inch Touchscreen Camera R1M Card Recording Flight Controller FPV Drone ground station image transmission remote Raspberry Pi 5 Gen3 Raspberry Pi 7 inch QLED Quantum Dot Display 1024x600 Capacitive Touchscreen For Computer PC/Jetson/Game Jetson Nano 3G module Raspberry Pi VGA to TTL ESP32 C3 Round LCD Development Board Electronic EYE 0.71 inch Display Watch Screen GC9A01 160x160 Good low light performance RS485 Bus 1.54inch OLED user guide Raspberry Pi ZERO Camera ESP32 C3 1.44inch LCD Raspberry Pi 5 Official Red-White Case Raspberry Pi 5 DSI Bookworm Jetson Orin Case ESP32‑S3 13.3-inch E6 Full-Color E-Ink e-Paper Display ESP32-S3 1.28inch Raspberry Pi 3.5 inch e-Paper link (G) RYBW 384x184 For Arduino / Jetson Nano / STM32 USB To CAN