• sales

    +86-0755-88291180

Arduino UNO R4 Tutorial - WIFI Remote Control

1, Setting IDE Environment

2,Compilation and Testing of LED Example

Note: When using the Arduino UNO R4 WIFI board for the first time and there is no serial port displayed upon inserting the USB cable, please wait for a while as the computer will automatically install the Arduino UNO R4 WIFI driver.

2.1】 Open the official built-in example



2.2】 After opening the project, modify the user’s WIFI name and password.



2.3】 Once the modifications are complete, you can proceed with uploading.

After a successful upload, click on the Serial Monitor. If there is no output in the Serial Monitor, press the reset button once to view the user’s WIFI address information.

Copy this link to a web page (each person’s IP address is different).



4】 Copy the link “http://192.168.2.24” to a web page. It will display the following page.



5】 Click the button to control the onboard LED lights on and off.

TAG: Raspberry Pi Real time clock SIM8230G M2 3G/4G/5G/GNSS/GPS Sub-6G PCIe M.2 Moudle For LTE-A/NSA/SA For DFOTA /VoLTE For SIMCOM ESP32 C6 Development Board with 1.32inch AMOLED Display QSPI Interface WiFi 6 Audio Acquisition Deepseek Raspberry Pi 5 PCIe to M.2 Multi Function Adapter Board Supports Dual 4K HDMI Output ESP32-S3 USB Dongle SpotPear Jetson Orin NX Case Raspberry Pi 5 PCIe to 4 Port 2.5G Gigabit Ethernet Adapter RJ45 Ports 800×480 ESP32 S3 Development Board 2.8 inch Round LCD Display 480x480 QMI8658 Sensor / SD /MP3 Audio /Battery Port LVGL/HMI For Arduino ESP32-S3R2 Raspberry Pi 5 Active Cooler Industrial Isolation USB TO RS232/485/422/TTL FT232RNL Serial UART Converter DeepSeek AI Voice Chat Robot ESP32 S3 Camera Object Recognition Development Board N16R8 For Xiaozhi Dual microphone interruption CV1800B X1015 Raspberry Pi 5 PCIe to M.2 Key-M NVMe SSD Board Pi5 2280 Xiaozhi-AI-video-tutorial-2 SpotPear Jetson-nano-to-boot-the-system User Guide Lidar