Binocular Camera Base For CM4
Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products
Designed for Compute Module 4 Lite/eMMC variants
![](https://cdn.static.spotpear.com/uploads/picture/product/raspberry-pi/rpi-cm/cm4-dual-camera-base/cm4-dual-camera-base-06.jpg)
Ordering Options
D![](https://cdn.static.spotpear.com/uploads/picture/product/raspberry-pi/rpi-cm/cm4-dual-camera-base/cm4-dual-camera-base-20.jpg)
Please check the Package Content section for exact part list.
Connecting With Compute Module 4
Standard CM4 Socket, Compatible With Compute Module 4 Lite/EMMC Variants![](https://cdn.static.spotpear.com/uploads/picture/product/raspberry-pi/rpi-cm/cm4-dual-camera-base/cm4-dual-camera-base-08.jpg)
for reference ONLY, CM4 is NOT included.
Dual Camera Base Introduction
Providing Interfaces Including ETH, HDMI, Micro SD, USB![](https://cdn.static.spotpear.com/uploads/picture/product/raspberry-pi/rpi-cm/cm4-dual-camera-base/cm4-dual-camera-base-09.jpg)
DUAL CAMERA BASE SPECIFICATIONS |
---|
CM4 socket | suitable for all variants of Compute Module 4 |
Networking | Gigabit Ethernet RJ45 |
USB | USB 2.0 × 1 |
FFC connector | HDMI & PCIe & USB FFC connector × 1 |
GPIO FFC connector × 1 |
Dual camera | pixels | 8MP |
sensor | IMX219 |
resolution | 3280 × 2464 (per channel) |
CMOS size | 1/4 inch |
aperture | F2.4 |
focal length | 2.6mm |
FOV | 83/73/50 degree (diagonal/horizontal/vertical) |
distortion | < 1% |
baseline length | 60mm |
Video | HDMI × 1, supports 4K 30fps output |
Storage | MicroSD card socket for Compute Module 4 Lite (without eMMC) variants |
Power input | 5V/2.5A |
Dimensions | 85.0 × 51.5mm |
Optional Interface Expander Introduction
Providing Interfaces Including GPIO, HDMI, USB, M.2 M KEY![](https://cdn.static.spotpear.com/uploads/picture/product/raspberry-pi/rpi-cm/cm4-dual-camera-base/cm4-dual-camera-base-10.jpg)
INTERFACE EXPANDER SPECIFICATIONS |
---|
USB | USB 2.0 × 3 |
FFC connector | HDMI & PCIe & USB FFC connector × 1 |
GPIO FFC connector × 1 |
Other connector | M.2 M KEY × 1, for connecting NVME SSD or communication module |
Raspberry Pi 40PIN GPIO header × 1 |
Video | HDMI × 1, supports 4K 30fps output |
Dimensions | 85.0 × 51.5mm |
8MP, Clear Imaging, Effective Recognition
Dual 8MP Cameras, Up To 3280 × 2464 Resolution Per Camera![](https://cdn.static.spotpear.com/uploads/picture/product/raspberry-pi/rpi-cm/cm4-dual-camera-base/cm4-dual-camera-base-11.jpg)
Dual 4K UHD Outputs Support*
Dual HDMI Ports, Supports Dual 4K 30fps Outputs![](https://cdn.static.spotpear.com/uploads/picture/product/raspberry-pi/rpi-cm/cm4-dual-camera-base/cm4-dual-camera-base-12.jpg)
* the interface expander is required for dual 4K outputs.
Reserved Space For Heatsink
Allows Attaching Heatsink For Better Heat Dissipation
![](https://cdn.static.spotpear.com/uploads/picture/product/raspberry-pi/rpi-cm/cm4-dual-camera-base/cm4-dual-camera-base-13.jpg)
for reference ONLY, CM4 and heatsink are NOT included.
Extensive Applications
For AI Applications Like Vision Robots, Depth Vision Projects, Stereo Vision Projects...![](https://cdn.static.spotpear.com/uploads/picture/product/raspberry-pi/rpi-cm/cm4-dual-camera-base/cm4-dual-camera-base-14.jpg)
What's On Board
The Dual Camera Base![](https://cdn.static.spotpear.com/uploads/picture/product/raspberry-pi/rpi-cm/cm4-dual-camera-base/cm4-dual-camera-base-15.jpg)
- CM4 socket
suitable for all variants of Compute Module 4 - HDMI connector
supports 4K 30fps output - USB 2.0 port
for connecting sorts of USB devices - PWR & USB
USB-C connector, 5V DC power supply or USB programming port - BOOT selection
ON: CM4 will be booted from USB-C interface
OFF: CM4 will be booted from eMMC or Micro SD card
- CM4 status indicator
PWR: Raspberry Pi power indicator
ACT: Raspberry Pi operating status indicator - RJ45 Gigabit Ethernet
10/100/1000M compatible - Micro SD card slot
for connecting a Micro SD card with pre-burnt image (Lite variant ONLY) - GPIO FFC connector
for expanding 40PIN GPIO - HDMI & PCIe & USB FFC connector
for expanding HDMI1, PCIe, USB - Dual cameras
IMX219, 8MP
The Interface Expander![](https://cdn.static.spotpear.com/uploads/picture/product/raspberry-pi/rpi-cm/cm4-dual-camera-base/cm4-dual-camera-base-16.jpg)
- USB 2.0 port
for connecting sorts of USB devices - HDMI1 connector
supports 4K 30fps output - HDMI & PCIe & USB FFC connector
for expanding HDMI1, PCIe, USB - GPIO FFC connector
for expanding 40PIN GPIO
- 40PIN GPIO header
for connecting sorts of Raspberry Pi HATs - M.2 M KEY
for NVME SSD, or communication module with PCIE M.2 M KEY interface - M.2 indicator
indicating operating status of the interface
![](https://cdn.static.spotpear.com/uploads/picture/product/raspberry-pi/rpi-cm/cm4-dual-camera-base/cm4-dual-camera-base-17.jpg)
【CM4-DUAL-CAMERA-BASE】
- Dual camera base x1
- Screws pack x1
![](https://cdn.static.spotpear.com/uploads/picture/product/raspberry-pi/rpi-cm/cm4-dual-camera-base/cm4-dual-camera-base-18.jpg)
【CM4-DUAL-CAMERA-BASE-Acce-A】
- Dual camera base x1
- Screws pack x1
- Interface expander x1
- FFC 2PCS x1
![](https://cdn.static.spotpear.com/uploads/picture/product/raspberry-pi/rpi-cm/cm4-dual-camera-base/cm4-dual-camera-base-19.jpg)