Raspberry Pi SIM7070G Cat M/NB IoT/GPRS HAT, GNSS

Raspberry Pi SIM7070G Cat M/NB IoT/GPRS HAT, GNSS

$32.89

Brand：Spotpear

SKU：0102010

Date：2020-08-01 13:50

Part Number：

SIM7070G-Cat-M/NB-IoT/GPRS-HAT

No：

- +

In Stock

Buy It Now

Add to cart

Ask a Question

Copy Link

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards

Supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT

Supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo)

NB-IOT / CAT-M / GPRS / GNSS HAT

Low Power Narrow Band Cellular IoT Communication Module For Raspberry Pi

Based on SIM7070G, Global Band Support

This is a telecommunication HAT for Raspberry Pi which supports global bands of NB-IoT, Cat-M, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.

Compared to SIM7080G, this module also supports GPRS (2G); compared to SIM7000C/E, it is more generic due to the global bands support.

Features At A Glance

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
Supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
Supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo)
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Breakout UART control pins, to connect with host boards like Arduino/STM32
SIM card slot, supports ONLY 1.8V SIM card (3V SIM card is not available)
2x LED indicators, easy to monitor the working status
Baudrate: 300~3686400 bps
Common baudrate auto-negotiation: 9600/19200/38400/57600/115200 bps
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Specifications

NB-IOT/CAT-M/2G
Band	NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85
	Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85
	GSM/GPRS/EDGE: 850/900/1800/1900MHz
Data rate	NB-IoT: 136Kbps(DL)/150Kbps(UL)
	Cat-M: 589Kbps(DL)/1119Kbps(UL)
	GPRS: 85.6Kbps(DL)/85.6Kbps(UL)
	EDGE: 236.8Kbps(DL)/236.8Kbps(UL)
SIM card support	NB-IoT/Cat-M/2G card (1.8V SIM card ONLY)
Applicable region	global
GNSS
Receiver type	16-channel
Receiver type	C/A Code
Band	GPS L1: 1575.42 ± 1.023MHz
	GLONASS L1: 1598.0625 ~ 1605.375MHz
	BDS B1: 1559.052 ~ 1591.788MHz
	Galileo L1: 1575.42 ± 1.023MHz
Data format	NMEA-0183
Antenna	Active antenna
OTHER
Power supply	5V
Operating voltage	5V / 3.3V (configured via 0Ω resistor)
Current consumption	about 41mA (idle mode)
Operating temperature	-40°C ~ 85°C
Storage temperature	-45°C ~ 90°C
Dimensions	30.50mm × 65.00mm

Standard Raspberry Pi 40PIN GPIO

Compatible With Raspberry Pi Series Boards

What's On Board

SIM7070G
MP1482 power chip
RT9193-33 power chip
Raspberry Pi GPIO header
for connecting with Raspberry Pi
USB interface
for testing AT Commands, getting GPS positioning data, etc.
SIM7070G control interface
for connecting with host boards like Arduino/STM32
SIM card slot
supports 1.8V SIM card ONLY
GNSS antenna connector
LTE antenna connector

Module power key
Network status indicator
Power indicator
Operating voltage selection
A: set IO level as 5V
B: set IO level as 3.3V (default)
DTR selection
A: DTR is connected to P26
B: DTR is disconnected (default)
PWR selection
A: PWR is connected to P4 (default)
B: PWR is connected to power supply

Pinout Definition