【Feature】

[] Narrow bezel, compact size, and equipped with level conversion circuit.

[] Uses both four-wire SPI and I2C interfaces, ensuring good compatibility and fast data transfer.

[] Built-in SSD1309 driver chip, communicates through SPI/I2C interface.

[] Comes with comprehensive documentation (example programs for Raspberry Pi, Pico, Arduino, STM32, ESP32, Jetson Nano, etc.).

【Specifications】

[] Operating Voltage: 3.3V / 5V

[] Display Panel: OLED

[] Resolution: 128 × 64 pixels

[] Pixel Size: 0.4 × 0.4mm

[] Communication Interface: 4-wire SPI (default), I2C

[] Control Chip: SSD1309

[] Display Size: 55.01 × 27.49mm

[] Product Size: 61.50 × 39.50mm

[] Display Color:

2.42inch OLED Module: White

2.42inch OLED Module (C): Yellow

【Control Interfaces】

RST: Reset, active low

DC: Data/Command, low level indicates command, high level indicates data

CS: Chip Select, active low

CLK: Clock signal input

DIN: Data input

GND: Ground

VCC: Power supply positive (3.3V / 5V power input)

【Version Selection】

【Hardware Connection】

Connect to the Raspberry Pi Board via the SPI interface:

Connect to the Arduino Board via the SPI interface:

【Usage Example】

The images are for demonstration purposes only. This product does not include an STM32 development board.

【Product Dimensions】

[] 2.42inch-OLED-Module x1

1. 2.42inch-OLED-Module x 1

2. GH1.25 7PIN Connector Cable x 1

[] 2.42inch-OLED-Module-C x1

1. 2.42inch-OLED-Module-C x 1

2. GH1.25 7PIN Connector Cable x 1

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com