【Overview】

[] The Air101 development board uses an Air101 processor, with built-in 2MFlash and 176KLuatOS exclusive RAM. The maximum main frequency can reach 240MHz, and is packaged in QFN32. 18 sets of GPIO are available. All pins are extracted from the development board, and the Type-C on board can download the code without the need for a downloader, making it easy to use. LuatOS official adaptation, script development does not require a complex development environment, and comes with rich use cases and tutorials for quick and hands-on use. 

[] The Air101 chip is an IoTMCU chip. The chip integrates 32 processors, with a main frequency of up to. 240MHz, and is equipped with peripheral interfaces such as UART, SPI, I2C, GPIO, ADC, PWM, etc; Built in 2MB Flash storage. Air101 supports LuatOS development.

【Air101 chip parameters】

[] CPU: 32-bit processor, operating frequency 240MHz

[] Flash：2MB

[] Lua virtual machine RAM: 176KB

[] Serial port:

Supports 5-way UART

Baud rate range: 1200bps-2Mbps

Data bits: 5-8bit

Stop bit: 1bit/2bit

Parity: configurable

RTS/CTS flow control: UART1 can support

[] SPI: Only supports one SPI interface

Only supports master

[] I2C: Supports 1 channel 12C interface

Speed: 100KHz~400KHz

Only supports master

[] ADC: Supports 2 channels of 16 bit ADC, with a maximum sampling rate of 1KHz

[] GPIO: Supports up to 18 GPIOs

[] PWM: Supports 5 PWM outputs

Frequency range: 3Hz~160Khz

Maximum accuracy of duty cycle: 1/256

Calculator width for inserting dead zones: 8bit

[] Packaging: QFN32 packaging, 4mm x 4mm

【Air101 Development Board Parameters】

[] Power supply method: Type-C power supply or 5v/3.3v pin direct supply

[] 2.54mm standard needle arrangement, single sided layout, can be directly used as a core board

[] All IO has been extracted, and 3 LED lights are on board

[] On board Boot and Wakeup buttons for easy debugging

【Pin Definition】

【Outline Dimensions】

【Video】

[] Just Air101 Chip

[] Just Air101 Demo Board

[] Air101 Board with Extra Chip

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com