【Note】

[] Do not include Compute Module 4

【Overview】

[] CM4-NVME-NAS-BOX is an all-in-one mini-computer, mainly designed but not limited to homes, small home offices, etc. Provides a simple and easy-to-use solution, no expert knowledge of networking and storage systems is required. On-board infrared, audio, and other modules.

【Features】

[] All-in-one Mini-Computer, mainly designed for home, small home office, etc.

[] Provides a simple and easy-to-use solution, no expert knowledge of networking and storage systems required

[] Onboard 2× M.2 M KEY slots for installing NVME Solid State Drives

[] Onboard MINI PCIE connector for installing 4G module

[] 2× HDMI 4K output interfaces

[] Onboard USB3.2 ports, IR receiver, RTC, dual Gigabit Ethernet connectors, 3.5mm jack, etc.

【Specifications 】

[] CM4 SOCKET : Suitable for all variants of Compute Module 4

[] NETWORKING：

Gigabit Ethernet RJ45 connector × 2 (Original Network port ETH0, and PCIE extended Network port ETH1)

MINI PCIE connector, supports 4G module (USB protocol, can not support PCIE protocol)

Nano-SIM card slot, supports standard Nano-SIM card for 4G/3G/2G Internet access

[] M.2 : Dual NVME Solid State Drives slots (compatible with 2230, 2242, 2260, 2280)

[] USB : USB 3.2 Gen1 (5Gbps) port× 2

[] CSI CAMERA : MIPI CSI-2 camera port × 2, 15pin 1.0mm FPC connector

[] HDMI : HDMI × 2, supports 4K 30fps output

[] AUDIO : 3.5mm earphone/mic jack

[] RTC : Real-time clock with battery socket and ability to wake Compute Module 4

[] TF CARD SLOT : TF card socket for Compute Module 4 Lite (without eMMC) variants

[] POWER INPUT : Type-C (5V 4A)

[] DIMENSIONS : 128 × 122 × 36mm

【Dual Solid State Drives Slots】

[] Dual Solid State Drives Slots

[] Onboard 2× M.2 M KEY Slots, Support All Sizes Of NVME Solid State Drives (2230, 2242, 2260, 2280)

【VESA Mounting Support】

[] For reference only, the stand and display are NOT included.

[] Supports 100×100mm And 75×75mm Standard VESA Holes

【Onboard Rich Interfaces】

【Precise Cut-Out With Clear Label】

[] Each Cut-Out Is Completely Aligned With The Connector

【Application Example】

[] For reference only, please check the Package Content for the detailed part list

[] Supports Connecting With Multiple Peripheral Devices, Suitable For Various Application Scenarios.

【Installation Instruction】

[] * For reference only, the CM4 is NOT included.

【Outline Dimensions】

【Video】

1. CM4-NVME-NAS-BASE x1
2. Metal case (top and bottom) x1
3. Momentary push button switch ~12mm (with LED and four pre-wired cables) x1
4. 30×40mm Silicone thermal tape x1
5. 15×15mm Silicone thermal tape (2PCS) x1
6. 7×7mm Silicone thermal tape (2PCS) x1
7. Antenna connector rubber plug (2PCS) x1
8. Screws pack x1