RP2040-Plus For Pico
Based On The Raspberry Pi Official Independent Research And Development RP2040
Compatible with most Raspberry Pi Pico modules
Features At A Glance
- Using Raspberry Pi's official self-designed RP2040 microcontroller chip
- Equipped with dual-core ARM Cortex M0 + processor, running frequency up to 133MHz flexible clock
- Built-in 264KB of SRAM and 4MB of on-chip Flash
- Adopt Type-C interface, keep up with the trend of the times, no need to entangle the positive and negative plug
- The onboard lithium battery charge and discharge interface is conducive to the use of this product in some mobile scenarios
- Onboard DC-DC chip TPS63000, 1.8A current switching high-efficiency
- DC-DC buck-boost chip
- Stamp hole design, can be directly welded and integrated into the base plate designed by the user
- USB1.1 host and device support
- Support low-power sleep and hibernation modes
- Can be identified as mass storage via USB for drag-and-drop download of programs
- Up to 26 multi-function GPIO pins
- 2 SPI, 2 I2C, 2 UART, 3 12-bit ADC, 16 controllable PWM channels
- Accurate on-chip clock and timer
- Temperature Sensor
- On-chip accelerated floating point library
- 8 programmable I/O (PIO) state machines for custom peripheral support
Version Selection
Support C/C++, MicroPython
Complete SDK, Open Source Materials And Tutorials, Easy To Use, Can Be Quickly Embedded In The Application
Dual-Core Processor
Onboard Dual-Core ARM Cortex M0 + Processor
Operating Frequency Up To 133 MHz
26 Multi-Function GPIO Pins
Support Configuration Pin Function, Convenient And Flexible Development And Integration
Resource Introduction
- LED lights
- ---User indicator (not power indicator)
- USB Type-C interface
- ---ETA6096
- ---High-efficiency lithium battery charging chip
- TPS63000
- ---High efficiency DC-DC buck-boost chip
- BOOT button
- ---Press when reset to enter download mode
- W25Q32JVSSIQ
- 2MB NOR-Flash
- RESET button
- ---Reset button
- RP2040
- ---Dual-core processor, up to 133MHz operating frequencyfrequency
- Battery interface
- ---MX1.25 connector, can be used to connect 3.7V lithium battery, support charge and discharge
- Pin interface
- ---Compatible with Raspberry Pi Pico standard interface
- USB test point
- ---Can lead to USB interface
- BOOT test point
- ---Connect with BOOT button
- DEBUG interface