Raspberry Pi Environment Sensor HAT sensor module

Raspberry Pi Environment Sensor HAT sensor module

$31.89

Brand：Spotpear

SKU：0102094

Date：2021-08-07 16:23

Part Number：

Environment-Sensor-HAT

No：

- +

In Stock

Buy It Now

Add to cart

Ask a Question

Copy Link

Raspberry Pi Environment Sensor HAT sensor module

Environment Sensor Module

Features At A Glance

The environmental sensor expansion board specially designed for Raspberry Pi is equipped with rich resources such as ambient light, VOC, infrared, ultraviolet, gyroscope, accelerometer, magnetometer, barometer, temperature and humidity sensor, etc., and uses I2C interface for communication.

As long as you use your hands, you can easily DIY the Raspberry Pi into a robot that can detect the movement posture and orientation, or you want the Raspberry Pi to collect the temperature and humidity, atmospheric pressure, ambient light, VOC, infrared, and ultraviolet of the surrounding environment. Wait for the sensor data, then take him!

Based on Raspberry Pi 40PIN GPIO interface design, suitable for Raspberry Pi series motherboards
Onboard TSL25911FN digital ambient light sensor, which can measure infrared light intensity and visible light of the human eye
The onboard BME280 temperature, humidity and air pressure sensor can measure temperature, humidity, and air pressure
Onboard ICM20948 motion attitude sensor, which can measure acceleration, gyroscope, magnetometer
On-board LTR390-UV-1 ultraviolet sensor, which can measure the intensity of ultraviolet light
Onboard SGP40 gas sensor, can detect environmental VOC
I2C interface communication, two wires can be read
Provide complete supporting information manual (Raspberry/Arduino/STM32 sample program)

Specifications

TSL25911FN Digital ambient light sensor
I2C address	0x29
Effective range	0~88000Lux
BME280 Temperature, Humidity and Pressure Sensor
I2C address	0x76
temperature check	-40 ~ 85℃ (Resolution 0.01℃, accuracy ±1℃ )
Humidity detection	0~100%RH (Resolution 0.008%RH, accuracy ±3%RH, response time 1s, hysteresis ≤2%RH )
Air pressure detection	300~1100hPa (Resolution 0.18Pa, accuracy ±1hPa )
ICM20948 Motion Attitude Sensor (9-axis sensor, 3-axis acceleration, 3-axis gyroscope, 3-axis magnetometer )
I2C address	0x68
Accelerometer resolution	16 Bit
Acceleration measurement range (optional)	±2、±4、±8、±16g
Gyro resolution	16 位
Gyro range (optional)	±250、±500、 ±1000、±2000°/sec
Magnetometer resolution	16 Bit
Magnetic measurement range	±4900µT
LTR390-UV-1 UV sensor
I2C address	0x53
Response wavelength	280nm - 430nm
SGP40 gas sensor
I2C address	0x59
Measuring range	0 to 1,000 ppm ethanol equivalent
Detection limit	< 0.05 ppm ethanol equivalent <10% concentration set point (whichever is greater)
Response time	< 10 s (tau 63 %)
Start Time	< 60 s
Support on-chip humidity compensation

Raspberry Pi Header Compatibility

For Raspberry Pi

Raspberry Pi is NOT included.

What's On Board

Module status indicator
Easy access to Raspberry Pi
TSL25911FN
Digital ambient light sensor, which can measure infrared light intensity and human visible light
LTR390-UV-1
Ultraviolet sensor, can measure the intensity of ultraviolet light
SGP40
gas sensor
ICM20948
3-axis acceleration, 3-axis gyroscope, 3-axis magnetometer
BME280
Temperature, Humidity and Pressure Sensor
Logic voltage conversion chip
3.3V to 1.8V
Voltage regulator chip
5V to 3.3V/1.8V