Compute Module 4 PoE Board
Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products
PoE Base Board for all Compute Module 4 VariantsWhat's The Differences
| WAVESHARE CM4 POE IO BOARD | RASPBERRY PI CM4 IO BOARD |
---|
POE | integrates 802.3af-compliant PoE circuit (5V/2.5A) | PoE header only |
---|
USB | 4x USB 3.2 Gen1 ports Micro USB port | 2x USB 2.0 ports Micro USB port |
---|
ETHERNET | Gigabit Ethernet RJ45 with PoE support | Gigabit Ethernet RJ45 with PoE support |
---|
HEADER | Color-coded 40PIN GPIO header | 40PIN GPIO header standard PCIe Gen 2 × 1 socket |
---|
FAN | 5V / 12V standard fan connector | 12V standard fan connector |
---|
POWER INPUT | 7V~36V | 12V |
---|
CM4 SOCKET | suitable for all variants of Compute Module 4 |
---|
RTC | Real-time clock with battery socket and ability to wake Compute Module 4 |
---|
VIDEO | 2x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable) |
---|
CAMERA | 2x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable) |
---|
SD CARD SLOT | MicroSD card socket for Compute Module 4 Lite (without eMMC) variants |
---|
DIMENSIONS | 160 × 90mm |
---|
Connecting With Compute Module 4
Standard CM4 Socket And Color-Coded Raspberry Pi 40PIN GPIO Header
Suitable For All Variants Of Compute Module 4
Rich Peripheral Connectors
Onboard Connectors Including CSI/DSI/RTC/HDMI/USB/ETH/TF Card
Application Example
Suitable For PoE Powered Raspberry Pi Projects, Or Other Industrial Context
for reference only, CM4, display, and cameras are NOT included.
What's On Board
- CM4 socket
suitable for all variants of Compute Module 4 - Power input
7~36V wide range power supply - Gigabit Ethernet connector
Gigabit Ethernet RJ45 with PoE support - USB SLAVE port
allows burning system image into Compute Module 4 eMMC variants - USB3.2 ports
4x USB 3.2 Gen1 ports, for connecting sorts of USB devices - HDMI ports
2x HDMI ports, supports dual 4K 30fps output - RTC
RTC battery holder, allows RTC-related functions like wakeup, shutdown, reboot, and more - CAM
2x MIPI CSI camera ports - DISP
2x MIPI DSI display port
- FAN
for connecting cooling fan, allows speed adjustment and measurement - FAN power selection
5V or 12V voltage to drive the fan - IO-VREF/PoE selection
CM4 IO logic level: 3.3V or 1.8V
PoE: enable (EN) or disable (DIS) - 40PIN GPIO header
- CAM0 and DISP0 I2C bus
fit the jumpers when using CAM0 or DISP0 - Misc configurations
- Dual LED indicators
red: Raspberry Pi power indicator
green: Raspberry Pi operating statusindicator - TF card slot (bottom side)
insert a Micro SD card with pre-burnt system, to start up Compute Module 4 Lite