7.5inch E Ink display HAT, red, black, white, 880×528

7.5inch E Ink display HAT, red, black, white, 880×528

$57.89

Brand：Spotpear

SKU：0106030

Date：2020-07-07 14:21

Part Number：

7.5inch-HD-e-Paper-HAT-(B)

No：

- +

In Stock

Buy It Now

Add to cart

Ask a Question

Copy Link

This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 880×528 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Do not include Raspberry Pi

Features

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3.3V / 5V MCUs
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

Operating voltage: 3.3V / 5V
Interface: 3-wire SPI, 4-wire SPI
Outline dimension: 170.2mm × 111.2mm × 1.25mm
Display size: 163.24mm × 97.94mm
Dot pitch: 0.1855mm × 0.1855mm
Resolution: 880×528
Display color: red, black, white
Grey scale: 2
Full refresh time: 21s
Refresh power: 50mW(typ.)
Standby power: <0.017mW
Viewing angle: >170°

Interface

SYMBOL	DESCRIPTION
VCC	3.3V / 5V
GND	Ground
DIN	SPI MOSI pin
CLK	SPI SCK pin
CS	SPI chip selection, low active
DC	Data / Command selection (high for data, low for command)
RST	External reset, low active
BUSY	Busy status output, low active