Note:This is Not a Raspberry Pi Pico , It is a Size compatible with Raspberry Pi Pico But CPU is different from Raspberry Pi Pico
which mean you can not run Raspberry Pi Pico same Program
However, You can use ESP-IDF,Arduino,MicroPython to run this board
Overview
- The ESP32-S3-Pico is a low-cost, high-performance microcontroller development board with a compact size and rich peripheral interfaces.
- Adopts ESP32-S3R2 as the main chip, which is an MCU chip with integrated 2.4 GHz Wi-Fi and Bluetooth 5 (LE).
- The interface chips are CH343 and CH334, so you can experience the fun of USB and UART development with a single USB-C port, and no more trouble switching interfaces.
- The DC-DC chip adopts MP28164, a high-efficiency buck-boost chip, which adopts PWM fixed-frequency current control mode to optimize circuit stability and response speed.
- You can choose ESP-IDF, Arduino, MicroPython, or other development environments in software so that you can easily and quickly get started and apply it to the product.
Features
- Adopts ESP32-S3R2 chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz
- Integrated 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB Flash memory
- Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance.
- Type-C connector, easier to use
- Onboard CH343 and CH334 chips can meet the needs of USB and UART development via a Type-C interface
- Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip with load current up to 2A
- 27 × multi-function GPIO pins
- Rich peripheral interfaces, including full-speed USB OTG, SPI, I2C, UART, ADC, PWM and DVP (8-bit ~ 16-bit camera interface), LCD interfaces (8-bit ~ 16-bit parallel RGB, I8080, MOTO6800), etc. to achieve various functions flexibly
- Castellated module allows soldering directly to carrier boards
- Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenarios
- Supports Raspberry Pi Pico expansion board ecology, suitable for artificial intelligence IoT application development
Supports ESP-IDF, Arduino, MicroPython
Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started
ESP32-S3 Designed For AIoT Applications
Powered By Xtensa 32-Bit LX7 Dual-Core Processor With Frequency Up To 240 MHz
Powerful AI Computing Capability & Reliable Security Features
WIFI And BLE 5 Support
ESP32-S3 Integrates 2.4 GHz Wi-Fi (802.11 B/G/N) With 40 MHz Of Bandwidth Support
Its Bluetooth Low Energy Subsystem Supports Bluetooth 5 (LE) And Bluetooth Mesh
27 × Multi-Function GPIO Pins
Configurable Pin Function, Allows Flexible Development And Integration
Note: SPI, I2C, UART and other interfaces can be mapped to most GPIOs through the GPIO Matrix and IO MUX, see the ESP32-S3 datasheet for details.
What's On Board
Features
- 1. ESP32-S3R2
- Xtensa 32-bit LX7 dual-core processor,
- with onboard 2MB PSRAM
- 2. 2.4G monopole ceramic antenna
- 3. W25Q128JVSIQ
- 16MB Flash memory
- 4. BOOT button
- Press it when resetting to enter download mode
- 5. RESET button
- 6. CH334F
- USB HUB controller
- 7. CH343P
- USB to UART chip
- 8. MP28164
- High efficiency DC-DC buck-boost chip
- 9. USB Type-C port
- 10. Power indicator
Supports More Pico Extension Modules
Outline Dimensions
Video