Note：This is Not a Raspberry Pi Pico , It is a Size compatible with Raspberry Pi Pico But CPU is different from Raspberry Pi Pico

which mean you can not run Raspberry Pi Pico same Program

However, You can use ESP-IDF，Arduino，MicroPython to run this board

   Overview

• The ESP32-S3-Pico is a low-cost, high-performance microcontroller development board with a compact size and rich peripheral interfaces.
• Adopts ESP32-S3R2 as the main chip, which is an MCU chip with integrated 2.4 GHz Wi-Fi and Bluetooth 5 (LE).
• The interface chips are CH343 and CH334, so you can experience the fun of USB and UART development with a single USB-C port, and no more trouble switching interfaces.
• The DC-DC chip adopts MP28164, a high-efficiency buck-boost chip, which adopts PWM fixed-frequency current control mode to optimize circuit stability and response speed.
• You can choose ESP-IDF, Arduino, MicroPython, or other development environments in software so that you can easily and quickly get started and apply it to the product.

   Features

• Adopts ESP32-S3R2 chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz
• Integrated 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB Flash memory
• Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance.
• Type-C connector, easier to use
• Onboard CH343 and CH334 chips can meet the needs of USB and UART development via a Type-C interface
• Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip with load current up to 2A
• 27 × multi-function GPIO pins
• Rich peripheral interfaces, including full-speed USB OTG, SPI, I2C, UART, ADC, PWM and DVP (8-bit ~ 16-bit camera interface), LCD interfaces (8-bit ~ 16-bit parallel RGB, I8080, MOTO6800), etc. to achieve various functions flexibly
• Castellated module allows soldering directly to carrier boards
• Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenarios
• Supports Raspberry Pi Pico expansion board ecology, suitable for artificial intelligence IoT application development

Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started

Powered By Xtensa 32-Bit LX7 Dual-Core Processor With Frequency Up To 240 MHz

Powerful AI Computing Capability & Reliable Security Features

ESP32-S3 Integrates 2.4 GHz Wi-Fi (802.11 B/G/N) With 40 MHz Of Bandwidth Support

Its Bluetooth Low Energy Subsystem Supports Bluetooth 5 (LE) And Bluetooth Mesh

Configurable Pin Function, Allows Flexible Development And Integration

Note: SPI, I2C, UART and other interfaces can be mapped to most GPIOs through the GPIO Matrix and IO MUX, see the ESP32-S3 datasheet for details.

   Features

• 1. ESP32-S3R2
• Xtensa 32-bit LX7 dual-core processor,
• with onboard 2MB PSRAM
• 2. 2.4G monopole ceramic antenna
• 3. W25Q128JVSIQ
• 16MB Flash memory
• 4. BOOT button
• Press it when resetting to enter download mode
• 5. RESET button
• 6. CH334F
• USB HUB controller
• 7. CH343P
• USB to UART chip
• 8. MP28164
• High efficiency DC-DC buck-boost chip
• 9. USB Type-C port
• 10. Power indicator

   Video

Bundle: ESP32-S3-Pico

1. ESP32-S3-Pico x1

Bundle: ESP32 S3 Pico M

1. ESP32-S3-Pico-weld x1