Raspberry Pi 4.26 inch e-Paper link (G) RYBW 800x480 For Arduino / Jetson / STM32 /ESP32

Raspberry Pi 4.26 inch e-Paper link (G) RYBW 800x480 For Arduino / Jetson / STM32 /ESP32

$33.9

Brand：SpotPear

SKU：010609100000

Date：2026-04-16 15:36

Part Number：

4.26inch e-Paper (G) 4.26inch e-Paper HAT+ (G)

No：

- +

In Stock

Buy It Now

Add to cart

Ask a Question

Copy Link

4.26-inch bare e-paper screen, red, yellow, black and white, 800×480 pixels, SPI communication, based on Raspberry Pi 40PIN GPIO interface design.

4.26-inch e-ink screen module

Low power consumption, wide viewing angle, and clear display even when power is off.

Used for display applications such as shelf labels and industrial instruments.

版本选择

Features At A Glance

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi / Jetson Nano / Arduino / STM32 / ESP32)
Optional for e-Paper driver board:
- Adapting SPI interface for connecting with controller boards like Raspberry Pi / Jetson Nano / Arduino / STM32 / ESP32, etc.
- Onboard voltage translator, compatible with 3.3V / 5V MCUs

Specifications

OPERATING VOLTAGE	Raw display: 3.3V	DISPLAY COLOR	Red/Yellow/Black/White
OPERATING VOLTAGE	with driver board: 3.3V/5V	DISPLAY COLOR	Red/Yellow/Black/White
INTERFACE	3-wire SPI, 4-wire SPI	GREY SCALE	2
OUTLINE DIMENSIONS	Raw display: 105.33 × 62.37 × 0.91 (mm)	FAST REFRESH TIME	20s
OUTLINE DIMENSIONS	with driver board: 107.00 × 64.00 (mm)	FULL REFRESH TIME	20s
DISPLAY SIZE	92.80 × 55.68 (mm)	REFRESH POWER	<90mW
DOT PITCH	0.116 × 0.116mm	STANDBY CURRENT	<0.01uA (almost none)
RESOLUTION	800× 480pixels	VIEWING ANGLE	>170°

Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Optional For E-Paper Driver Board

Standard Raspberry Pi 40PIN GPIO Header, Compatible With Raspberry Pi Series Boards, Jetson Nano

* for reference only, the Raspberry Pi is NOT included.

Onboard SPI Control Interface

For Use With Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32/ESP32

VCC	3.3V / 5V
GND	power ground
DIN	SPI communication MOSI pin
SCLK	SPI communication SCLK pin
CS	SPI Chip Select Pin (Active Low)
DC	Data/command control pin (high level indicates data, low level indicates command)
RST	External reset pin (low-level reset)
BUSY	Busy output pin
PWR	Power on/off control pin

Onboard Voltage Translator

Compatible With 3.3V / 5V MCUs

Application Examples

Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

Outline Dimensions

4.26inch e-Paper (G)

4.26inch e-Paper HAT+ (G)

[] 4.26inch e-Paper (G)

[] 4.26inch e-Paper HAT+ (G)

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!