
【】Posting on this site or replying to any posts indicates that you acknowledge, understand, and
I would like to know if it is possible to use accented fonts (á, é, ű ,ő ,ó etc.).
Hello just wanted to know. in the infomation window it is reading "Accept connectin from 192.168.3.x
I am getting an intermittent screen failure.The relevant dmesg output is:[ 8.392335] Go
I would like ask you how is in milk-v initiated the program compiled in arduino ide? Can I disable
Hello.I would like your help on how I can change the rotating symbol in the middle of the display in
My wavehouse HAT has no triangle mark on the board. As I don't have a triangle on my board, should I
Hi--I put the lcd touchscreen kit together and have loaded a pi-star startup software with the raspi
Where can I find examples and information for use in Visual Studio
Hello. I bought a modbus rtu relay 16ch. How do I set it up correctly in the Home Assistant program?
This time we would need Flah memory assembled. We would need at least 256MB (512MB would be also acc
where is Milk-V Duo 256M Assembly Drawing Component Layout Diagram ?
Firstly, when I plug the device in, I get nothing. No lights, no noticeable heat. I presume that's b
Hi need the information on pin use by module, as due to space and exposing headphone Jack, we can't
how do i out the device into DFU mode and then also connect it to MAC as A USB drive to flash the de
Hello,I am new to PI and smaller systems, so I need some guidance on what to buy to make the followi
How do I use the Pre-configured Image to install this LCD
I just bought this. I plugged it in. Nothing shows up. Other display hats reference installing a dri
The link for this;(Zero-LCD-HAT-(A)-231024-jw0-auto_start_screen)Leads to this.(https://cdn.static.s
What is the connector type for the encoder connection?
where did you get that magic number from? is it the same for milkv duo 256?