hello,
Ive got a very poor experience with ESP devices, Im trying to write an internet downloaded gauge into an ESP32 S3 LCD (non touch) 1.28" display, but I cannot achieve it..
I think the program is uploaded to ESP device, but screen never turn on.. (program uses LVGL lib ant TFT.
I have been use Arduino IDE, and doard defined ad ESP32 S3 DEV, but, when I want to write, the IDE said the program exceeds memmory board space, and if I select Waveshare ESP32s3 touch, the program is uploaded with no errors, but display never turn on....
somebody can help me ?
may be there are a tutorial or step by step document to check basic operations ...
best regards !!!
gerardo.
