• sales

    +86-0755-88291180

Raspberry Pi Pico 1.54inch LCD User Guide

【Resources】

】Green-1.54inch lcd

python: Pico 1.54 LCD.py

c: Pico 1inch54 LCD.zip


】Blue-1.54inch lcd

python: Pico 1.54 LCD.py

c: Pico 1inch54 LCD.zip

Schematic


Method 1 C Code (Raspberry Pi platform) 


1. Installation the compilation environment 

sudo apt-get install cmake --fix-missing

sudo apt-get install gcc-arm-none-eabi


SDK download

git clone -b master https://github.com/raspberrypi/pico-sdk.git

cd pico-sdk

git submodule update --init --recursive


The program needs to point to the SDK path

export PICO_SDK_PATH=../../pico-sdk 


(Change to your true path, Now you not need do this code , when you make program, you need this code )


2. Connect the hardware 


3. Run the program 

(1)Download, compile and run the c sample program of Pico 1inch54 LCD: (Green-1.54inch lcd Download: Pico 1inch54 LCD.zip(Blue-1.54inch lcd Download: Pico 1inch54 LCD.zip

   cd ~/Pico 1inch54 LCD /c/build

   sudo rm -rf ./*

   export PICO_SDK_PATH=../../pico-sdk
(Change to your true path )
   cmake ..
   make -j9
 After that, the uf2 file will be generated under the build. 

(2) Press and hold Pico's BOOTSEL and use the Micro USB cable to connect Pico to the Raspberry Pi's USB and then release 



Open the build folder in the actual program folder and pull the main.uf2 file into the above window



 

phenomenon:

Run the screen program, the picture can be seen on the screen.

Run the screen program, the picture stays in the small square screen, press the button, the corresponding small square will be red. 


Method 2 python Code (Raspberry Pi platfrom) 


1.Installation Thonny IDE

Please refer to the official link 

https://projects.raspberrypi.org/en/projects/getting-started-with-the-pico/2

2. Connect the hardware 

(1) 

2

3. Run the program

 (Green-1.54inch lcd Download: Pico 1.54 LCD.py(Blue-1.54inch lcd : Pico 1.54 LCD.py

Open the software 

phenomenon:

Run the screen program, the screen flashes blue, red and white once.

Run the screen program, press the button, the screen displays the corresponding button name.

TAG: luckfox-pico-ultra-w-gpio Use SC servo driver Step Recording and Reproduction MLX90641 Raspberry Pi 5 Case Raspberry Pi Pico 1024×600 Jetson Orin Nano UGV Beast PT ROS2 AI OpenCV Robot Car MediaPipe Raspberry Pi 4B/5 Industrial UART 2CH RS485 RS232 CAN FD HAT With Case For Installation of guide rails and hanging OLED-LCD-HAT-A Serial UART Bus Servo CF35-12 TTL 35KG.CM Magnetic-Encoder High precision and Large torque RP2040 5inch USB Monitor Raspberry-Pi-Pico-W-webserver Industrial Modbus RTU Dual Ethernet RJ45 To 8ch POE ETH Relay (C) PoE Power over Ethernet Magnetic Encoder Servo Motor 85KG.CM 12V/24V 360° RS485 High Precision And Large Torque pcb800099-v.9 PCB800099 2.13inch e Paper HAT+ Black-White 250x122 E-Ink For Raspberry Pi /Jetson Nano /Sunrise X3 Pi /Pwnago Raspberry Pi 5 Terminal Code