【Overview】

Solar Power Management Module (D): Recharged From 6V~24V Solar Panel, Or Type-C Power Adapter 5V/3A Regulated Output.

【Features】

The Solar Power Management Module (D) is designed for 6V~24V solar panel, it can charge the 3.7V rechargeable Li battery through solar panel or Type-C connector, and provides 5V/3A regulated output (supports multiple protocols such as PD/QC/FCP/PE/SFCP). The module features MPPT (Maximum Power Point Tracking) function and multi protection circuits, therefore, it is able to keep working with high-efficiency, stability, and safety. It is suited for solar-powered, low-power IoT, and other environmental protection projects.

[] Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel

[] Supports solar panel / Type-C power adapter for battery charging

[] For 6V~24V solar panel, supports self-adaptive input voltage via DC-002 jack or screw terminal, with input anti-reverse protection

[] Multi LED indicators, for monitoring the status of solar panel and batteries

[] Multi protection circuits: over-charge / over-discharge / overheat / over-current, stable and safe to use

【Version Selection】

【Application Examples】

[] Suitable For Solar-Powered Control System For MCUs / Development Boards Like Raspberry Pi / Jetson Nano / Arduino...

Note: for reference only, the Raspberry Pi 4B and solar panel are not included

【What's On Board】

1. Solar panel charging input:

charged by solar panel via DC-002 jack or screw terminal, self-adaptive input voltage

2. Type-C charging input:

charged by 5V power adapter via Type C connector, or outputs 5V for external device

3. Power output:

screw terminal: 5V/3A output

4. Battery interfaces:

for connecting 3.7V rechargeable Li battery via screw terminal or PH2.0 4P connector

5. SW6106:

USB power management chip, for USB charging and 5V/3A boost output

6. CN3791:

solar power management chip, for solar panel charging and buck input

7. XB8886A

Li battery over-charge / over-discharge protection

8. Battery capacity indicators

lights up when charging or under load connection, and will turn off after 30s when there is no load connected

9. Solar panel charging indicators:

Charge: on when solar panel charging

Done: on when the battery is full charged by solar panel

【Dimensions】

[] Solar-Power-Manager-D

1. Solar Power Manager (D) x1

2. Screws pack x1

[] Solar-Power-Manager-D-Acce-A

1. Solar Power Manager (D) x1

2. Battery holder x1

3. Screws pack x1

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com