【Product details】

【Product introduction】

【Product parameter comparison】

【Product features】

[]SLogic Combo 8 features a 4-in-1 multifunctional development tool that switches four functions with a - key. In addition, 3.3V and 5V are also supported as power output.

【Product use】

[]SLogic Combo8 supports the debugging of Cortex-MO/M3/M4/M core chips with SWD interfaces, and an additional virtual serial port with a maximum baud rate of 20M, which can be used to observe logs during simulation.

[]SLogic Combo 8 supports debugging of RISC-V core chips (e902, e907, c906, etc.). It also supports a virtual serial port with a maximum baud rate of 20M, which can be used for simulation and log observation.

[] SLogic Combo 8 When all serial ports are enabled, the Slogic Combo 8 supports four virtual serial ports with a maximum baud rate of 20 Mbit/s, which suits almost all environments where serial ports are required. Among them, UARTO and UART1 can reach the highest baud rate of 20M, and UART2 and UART3 can reach the highest baud rate of 1M.

【Product function labeling】

【Product pin】

Sipeed-SLogic-Combo-8-Black*1

USB-TYPE-C-Data-cable*1

Sipeed-SLogic-Combo-8-Black-Kit

Sipeed-SLogic-Combo-8-Black*1

USB-TYPE-C-Data-cable*1

Sipeed-SLogic-Combo-8-White*1

USB-TYPE-C-Data-cable*1

Sipeed-SLogic-Combo-8-White-Kit

Sipeed-SLogic-Combo-8-White*1

USB-TYPE-C-Data-cable*1

Chip-Clip*10

2*6p-cable*1

To：
Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com