• sales

    +86-0755-88291180

5.79inch ePaper Module (G) Red-Yellow-Black-White E-Ink For Arduino /Raspberry Pi /Jetson /STM32

$24.99

Brand:Waveshare
SKU:0106046
Date:2024-07-19 15:32
No:
In Stock

5.79inch E-Paper Display (G), E-Ink Display, 792x272, Red/Yellow/Black/White, SPI Interface

【Product Introduction】

[] 5.79inch E-Paper Display (G), E-Ink Display, 792x272, Red/Yellow/Black/White, SPI Interface

【Product Details】
5.79″ E-Paper (G)

Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity

Ideal For Price Tags, Shelf Labels, Industrial Instruments...


Note: the driver board is optional, please refer to the Package Content for detailed part list

【Version Options

【Features At A Glance

[] No backlight, keeps displaying last content for a long time even when power down

[] Ultra low power consumption, basically power is only required for refreshing

[] Comes with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Series/Arduino/STM32)

[] Optional for e-Paper driver board:

[] Adapting SPI interface for connecting with controller boards like Raspberry Pi/Jetson Series/Arduino/STM32, etc.

[] Onboard voltage translator, compatible with 3.3V / 5V MCUs

【Specifications
OPERATING VOLTAGERaw display: 3.3VDISPLAY COLORRed/Yellow/Black/White
with driver board: 3.3V/5V
INTERFACE3-wire SPI, 4-wire SPIGREY SCALE2
OUTLINE DIMENSIONSRaw display: 150.92 × 56.94 × 1.00mmFULL REFRESH TIME21s
with driver board: 152.50 × 58.50mm
DISPLAY SIZE139.00 × 47.74mmREFRESH POWER<30mW
DOT PITCH0.1755 × 0.1755mmSTANDBY CURRENT<0.01uA (almost none)
RESOLUTION792 × 272 pixelsVIEWING ANGLE>170°
Advantages Of EINK

[] E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.

[] E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Optional For E-Paper Driver Board

Onboard SPI Control Interface, For Use With Controller Boards Like Raspberry Pi/Jetson Series/Arduino/STM32


PWRPower on/off control
BUSYBusy status output pin
RSTExternal reset, low active
DCData/Command selection (high for data, low for command)
CSSPI chip selection, low active
CLKSPI SCK pin
DINSPI MOSI pin
GNDGround
VCCPower (3.3V / 5V input)
Onboard Voltage Translator

Compatible With 3.3V / 5V MCUs


Usage Example

Connecting With Raspberry Pi 5


* for reference only, the Raspberry Pi 5 is NOT included.

Supported Driver Boards For Raw Display

【Application Examples】
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

【Outline Dimensions】