2.66inch E Paper E Ink Display Module, Black / White, 296×152

2.66inch E Paper E Ink Display Module, Black / White, 296×152

$16.89

Brand：Spotpear

SKU：0106032

Date：2020-09-10 11:06

Part Number：

2.66inch-e-Paper-Module

No：

- +

In Stock

Buy It Now

Add to cart

Ask a Question

Copy Link

2.66inch E-Paper E-Ink Display Module, 296×152 Pixels, Black / White Dual-Color, SPI Interface

2.66" E-PAPER MODULE

Partial Refresh Support, Low Power, Wide Viewing Angle, Paper-Like Effect

Ideal for price tags, shelf labels, industrial instruments...

Features At A Glance

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
Onboard voltage translator, compatible with 3.3V / 5V MCUs
Comes with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

OPERATING VOLTAGE	3.3V/5V	GREY SCALE	2
INTERFACE	3-wire SPI, 4-wire SPI	PARTIAL REFRESH TIME	0.3s
OUTLINE DIMENSIONS	37.0 × 83.5mm	FULL REFRESH TIME	6s
DISPLAY SIZE	30.704 × 60.088mm	REFRESH POWER	42.4mW(typ.)
DOT PITCH	0.202 × 0.203mm	STANDBY CURRENT	<0.01uA (almost none)
RESOLUTION	296 × 152 pixels	VIEWING ANGLE	>170°
DISPLAY COLOR	black, white

Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Onboard SPI Control Interface

For Connecting With Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32

VCC	3.3V/5V
GND	Ground
DIN	SPI MOSI pin
CLK	SPI SCK pin
CS	SPI chip selection, low active
DC	Data / Command selection (high for data, low for command)
RST	External reset, low active
BUSY	Busy status output, high active