Raspberry Pi 2.23inch OLED display HAT, 128×32

$16.89

Brand：Spotpear

SKU：0201411

Date：2020-08-25 16:16

Part Number：

2.23inch-OLED-HAT

No：

In Stock

Buy It Now

Add to cart

Ask a Question

Copy Link

This is an OLED display HAT for Raspberry Pi, 2.23inch diagonal, 128×32 pixels, with embedded SSD1305 driver, communicating via SPI or I2C interface.

Trying to add a control interface for your Pi? This compact display would be the ideal choice.

Features

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Optional interfaces: SPI (default), or I2C, configured via onboard resistor
Brings control pins for host boards like Arduino/STM32
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

SYMBOL	RASPBERRY PI PIN (BCM)	DESCRIPTION
VCC	3V3/5V	Power input
GND	GND	Ground
DIN	MOSI	SPI data input
CLK	SCLK	SPI clock input
CS	CE0	Chip selection, low active
DC	P24	Data/Command selection (high for data, low for command)
RST	P25	Reset, low active

Forum：

ESP32-WROOM-32

ESP32 WROOM 32 ESP32 original module WROOM ESP 32 Dual Core WiFi Wireless Bluetooth MCU Module 32UE

Barcode-Scanner-Module-(C)

Barcode QR 2D Codes Scanner Module Supports High density Barcode Scanning Module

PICkit-5

Microchip Official Original PICkit5 Debugger Programmer Downloader Emulator PIC dsPIC MPU MPLAB AVR

CM4001000

Raspberry Pi CM4 Compute Module Lite Core board CM4001000 NO WIFI RAM 1G eMMC 0GB