1.02inch E Ink display module, black, white, 128×80

1.02inch E Ink display module, black, white, 128×80

$14.89

Brand：Spotpear

SKU：0106026

Date：2020-07-07 11:48

Part Number：

1.02inch-e-Paper-Module

No：

- +

In Stock

Buy It Now

Add to cart

Ask a Question

Copy Link

This is an E-Ink display module, 1.02inch, 128×80 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI control interface, for working with host boards such as Raspberry Pi/Jetson Nano/Arduino/Nucleo
Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

Operating voltage: 3.3V / 5V
Interface: 3-wire SPI, 4-wire SPI
Outline dimension: 42mm × 27mm
Display size: 21.76mm × 14mm
Dot pitch: 0.175 × 0.17
Resolution: 128 × 80
Display color: black, white
Grey scale: 2
Full refresh time: 2s
Refresh power: 26.4mW(typ.)
Standby power: <0.017mW
Viewing angle: >170°

Interface

SYMBOL	DESCRIPTION
VCC	3.3V / 5V power input
GND	Ground
DIN	SPI MOSI pin
CLK	SPI SCK pin
CS	SPI chip selection, low active
DC	Data/Command selection (high for data, low for command)
RST	External reset, low active
BUSY	Busy status output, low active