Hello, I've just received your ESP32 S3 dev board with 1.43 inch amoled display + touchscreen. I was trying to follow the new Project test explained here
https://spotpear.com/wiki/ESP32-S3-1.43-inch-AMOLED-Display-Capacitive-TouchScreen.html
that should just print hello world in the serial port.
Unfortunately this is not the case, the program seems to compile and it's uploaded correctly
The serial port is spitting out random things and it seems to continue rebooting:
I've also tried erasing and flashing firmware and erasing. No changes on that.
What should I do?
