Problems connecting to OpenBlocks

2025-10-29 19:25:38 Ask

Hi there at Spotpear,

I got this little gadget and I'm very satisfied with that. The only thing, I did not reach, is to connect it to the OpenBlocks environment.

So I want to know:

- is the device as it is shipped ready to work with OpenBlocks?

- what minimal firmware is necessary to connect it to Open Blocks?

- Is there a fitting, precompiled firmware for this purpose available or do I have to build it by myself?

Thank you very much!

Best regards,

Manfred Steinbach / Germany

APost Reply

Like0| report

3answers

SpotPearGuest48401

Answer time:2025-10-29 20:43:44

Not support OpenBlocks

You can find user guide from here

Like0

report

SpotPearGuestcef55

Answer time:2025-10-30 02:20:36

But:

on this page there is a link to OpenBlocks:

【Scratch】

Like0

report

SpotPearGuest48401

Answer time:2025-10-30 14:14:34

Sorry， I miss a mistake

The board can work on scratch

However, it was developed by a third-party spotpear's client which is not done by spotpear.

You might try asking the third-party development client on GitHub about this issue.

Like0

report

APost Reply