[] SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32
[] Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)

[] Communication interface: SPI
[] Display Panel: IPS
[] Control chip: ST7789V2
[] Resolution: 240 (H)RGB × 280(V)
[] Display size: 27.972mm × 32.634mm
[] Display R angle: 4-R5 (mm)
[] Pixel pitch: 0.11655mm × 0.11655mm
[] Dimensions: 31.5mm × 39.0mm

[] VCC : Power (3.3V / 5V input)
[] GND : Ground
[] DIN : SPI data input
[] CLK : SPI clock input
[] CS : Chip selection, low active
[] DC : Data/Command selection (high for data, low for command)
[] RST : Reset, low active
[] BL : Backlight

[] Connecting with STM32

1. 1.69inch LCD Module x1
2. GH1.25 20cm 8Pin cable x1