Hello,
I need an HDMI controller board for a 7-inch LCD removed from a portable CarPlay display.
LCD assembly marking: HL070WSH501037-B1 Resolution is most likely 1024 × 600.
The original motherboard uses a 40-pin LCD connector.
The capacitive touch panel is separate and uses a CST8922 controller.
Can PCB800099-V9 drive this LCD? I need:
1. PCB800099-V9 programmed for the correct resolution,
2. a compatible 50-pin-to-40-pin LCD cable/adapter,
3. correct backlight support.
Please confirm compatibility before I order.
Photos of the LCD, connector and original board
are attached.
