Dear Support Team,
I recently received the expansion board and am in the process of configuring it. While reviewing the manual, I came across a point that needs clarification regarding the "Module setting switch".
The manual specifies that for 5G / LTE-A M.2 modules (such as RM520N-GL, RM530X, EM06X series), the "C silkscreen switch" should be in the ON position.
This has led me to the following questions:
- Ambiguous Switch: The board has two distinct switches labeled "C". Which specific "C" switch does this instruction apply to?
- Functionality with Switches OFF: My system appears to function correctly even when all switches are OFF. The Jetson recognizes the modem, and I can successfully execute AT commands. Could you please explain the purpose of this "C" switch setting? What functionality is enabled or disabled when the switch is moved from OFF to ON?
Any clarification you can provide would be greatly appreciated.
Thank you for your time and support.
Best Regards,
