10.3inch flexible E Ink display HAT, black, white, 1872×1404

10.3inch flexible E Ink display HAT, black, white, 1872×1404

$239.89

Brand：Spotpear

SKU：0106022

Date：2020-07-04 17:49

Part Number：

10.3inch-e-Paper-HAT-(D)

No：

- +

In Stock

Buy It Now

Add to cart

Ask a Question

Copy Link

This is a flexible E-Ink display HAT for Raspberry Pi, 10.3inch, 1872×1404 resolution, with embedded controller IT8951, communicating via USB/SPI/I80/I2C interface, supports partial refresh.

Compared with normal e-Paper panels, this flexible panel allows bending without being damaged, and it's thinner and lighter.

Due to the advantages like low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as ebook reader, e-ink display, industrial instruments, and so on.

Features

Flexible e-Paper, the display section is bendable (DON'T bend the FPC section)
No backlight, keeps displaying last content for a long time even when power down
Low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
USB/SPI/I80/I2C interface, for connecting with host boards like Raspberry Pi/Nucleo, etc.
Comes with development resources and manual (examples for Raspberry Pi/STM32)

Specifications

Operating voltage: 5V
Interface: USB/SPI/I80/I2C
Outline dimension: 227.7mm × 165.8mm × 0.647mm
Display size: 209.664mm × 157.248mm
Dot pitch: 0.112mm × 0.112mm
Resolution: 1872 × 1404
Display color: black, white
Gray scale: 2-16 (1-4 bit)
Full refresh time: 450ms
Total refresh power: 1.2W(typ.)
Total standby power: 0.1W(typ.)
Viewing angle: >170°

SPI Pinouts

SYMBOL	DESCRIPTION
5V	Power input
GND	Ground
MISO	SPI MISO pin
MOSI	SPI MOSI pin
SCK	SPI SCK pin
CS	SPI chip selection, low active
RST	External reset, low active
HRDY	Busy status output, low active