ESP32-C3 compilation and flashing successful but just doesn't work

2025-03-02 01:14:49 Ask

Followed step by step the compiling instructions for ESP32 C3. Downloaded your project from github, didn't alter the code, just followed the instructions to get an starting point. Project compiles and flashes correctly.

Wrote 1215312 bytes (750459 compressed) at 0x00010000 in 7.6 seconds (effective 1272.9 kbit/s)...

Hash of data verified.

But then the device resets and get an empty screen, nothing works. Can you share what library versions you're using exactly? And more specific flashing parameters.

APost Reply

Like0| report

6answers

SpotPearGuest246b4

Answer time:2025-03-03 14:58:39

Hello, check the picture configuration

Like0

report

SpotPearGuest6d969

Answer time:2025-03-04 03:59:35

Thank you for your answer but that did not work. Sketch compiles and flashes successfully but device enters in boot loop constantly resetting. Can you please share the specific versions of all libraries from your project so I can replicate the exact same setup?

Like0

report

SpotPearGuest246b4

Answer time:2025-03-04 09:06:34

Hello, the version of the ESP32 development board is 2.0.13

Like0

report

SpotPearGuest6d969

Answer time:2025-03-04 23:30:00

Thank you very much but I still having the same issue. What about the version of the rest of the libraries?

U8g2
OneBitDisplay
BitBang_I2C
SparkFun_SCD4x_Arduino_Library
AnimatedGIF
thinger.io
Adafruit NeoPixel
ArduinoJson
HttpClient
lvgl
TFT_eSPI
Time
TJpg_Decoder

Like0

report

SpotPearGuest901fb

Answer time:2025-03-05 07:02:47

Hi. I'm having the same issue as the user described. Tried to compile with the libraries you provided but it is not working. I'm getting a blank screen. If I connect with the serial monitor I can see GuruMeditation errors and messages that the unit is rebooting, in loop. There might be some incompatibility with a library or some missing option. This is happening in three of the units that I have

Like0

report

SpotPearGuest901fb

Answer time:2025-03-08 19:24:50

Hi, bumping again. Is there some possible solution?

With the current code, can you still build with the batches of the trinket? I see other user having this same issue. I want to be able to develop using your code as scheme.

ESP32-C3 compilation and flashing successful but just doesn't work

Raspberry Pi Pico RP2040 + ESP32 C3 Dual-MCU-Board Onboard double MCU WIFI Bluetooth