Raspberry Pi 5 PCIe to M.2 NVMe SSD WD SN770 Compatibility

2024-08-10 22:20:41 Ask

Hello, i have this board and a wd sn770, it is not recognized. the power led blinds and there is voltage on the ssd board... gparted and sudo lsbsk dont show nothing. How to debug?

Raspberry Pi 5 PCIe to M.2 NVMe SSD

APost Reply

Like0| report

3answers

SpotPearGuest60f5f

Answer time:2024-08-11 18:06:49

Hello, is the power indicator light on your Pi5-PCIe-Fish-Board-A module not working? Try disconnecting the hard drive from the Pi5-PCIe-Fish-Board-A module and see if the power indicator light turns on. If it still doesn’t light up, it means the Pi5-PCIe-Fish-Board-A module is faulty.

Like0

report

SpotPearGuestf7b99

Answer time:2024-08-12 01:19:46

Hi, thanks for answering. but the led left of the drive is green and shining.

sudo lsblk sometimes shows the drive, sometimes not. never when gen3 is active.

Like0

report

SpotPearGuest60f5f

Answer time:2024-08-12 10:22:31

Can you record a video of the device malfunction?

What version of the Bookworm system are you currently using?

Is the WD SN770 functioning normally on other devices?

Was the WD SN770 SSD inserted before powering on the Raspberry Pi 5?

Do you have any other brands of SSDs around for comparison testing?

Like0

report

APost Reply

Raspberry Pi 5 PCIe to M.2 NVMe SSD WD SN770 Compatibility

Raspberry Pi 5 PCIe to M.2 NVMe SSD Adapter Board HAT Pi5-PCIe-Fish-Board-A