Best GPIO Pins for MPU6050 on ESP32-C3 Desktop Trinket Mini TV (1.44" ST7735 LCD)?

2026-05-18 07:49:41 Ask

Hi everyone,

I am trying to connect an MPU6050 sensor to the Spotpear ESP32-C3 Desktop Trinket Mini TV Portable Pendant with the 1.44" ST7735 LCD and LVGL.

I would like to know:

Which GPIO pins are recommended for I2C on this ESP32-C3 board?
Has anyone successfully connected an MPU6050 to this board? If yes, could you share the working pin configuration?

Any help or example would be greatly appreciated.

Thanks!

APost Reply

Like0| report

2answers

SpotPearUser3661

Answer time:2026-05-20 11:17:19

Connecting sensors to microcontrollers can be tricky. I remember struggling with a similar project involving an accelerometer and an Arduino. Finding the right pin configuration was a real headache, especially with limited documentation. It made me appreciate simpler forms of entertainment sometimes, like playing Infinite Craft to unwind. Eventually, after much trial and error, and consulting online forums, I found a configuration that worked. Hopefully someone with experience on the ESP32-C3 and MPU6050 can provide some specific advice on I2C pins for this particular setup. Good luck with your project.

Like1

report

SpotPearGueste478f

Answer time:2026-05-30 19:12:51

Every Escorts in Noida collaborating with us for a real client, just like you, has received genuine training guidance. Ways to connect with all customers like you, how to show respect, and how a man's heart is satisfied by her warm presence on a cozy bed, we have instructed all these aspects to our lovely employee.

Like0

report

APost Reply

Best GPIO Pins for MPU6050 on ESP32-C3 Desktop Trinket Mini TV (1.44" ST7735 LCD)?

ESP32 C3 desktop trinket Mini TV Portable Pendant LVGL 1.44inch LCD ST7735