Features

• 15.6-inch QLED touch display with a hardware resolution of 1920 x 1080.
• 10-point touch control, toughened glass panel with up to 6H hardness.
• Adopts optical bonding technique for better display.
• When working with Raspberry Pi, supports Raspberry Pi OS, Ubuntu, Kali, and Retropie systems.
• When working with Windows PC, support Windows 11/10/8.1/8/7.
• Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc.
• Built-in high-fidelity speakers with 3.5mm audio and support for HDMI audio output.
• All-metal CNC alloy case.

Parameters

Electrical Parameters

•Note 1: Input voltage exceeding the maximum value or improper operation may cause permanent damage to the device.
•Note 2: The input current should be ≥1000mA, otherwise it will lead to start-up failure or abnormal display, and a long time in an abnormal state may cause permanent damage to the device.
•Note 3: Please do not put the display in a high temperature and high humidity storage environment for a long time, the display needs to work within the limit value, otherwise it will be possible to damage the display.

EDID Sequence Parameters

If the system of the main control board can automatically identify the EDID for display, there is no need to set the relevant timing parameters additionally.

Otherwise, you can refer to the following EDID settings:

Interface Description

User Manual

Working with PC

Support Windows 11/10/8.1/8/7

How to Use

1. Supply 12V for the POWER port of the Monitor.
2. Connect the Touch port of the LCD to the USB interface of the PC, and Windows will automatically identify the touch function.
3. Connect the LCD's HDMI interface to the PC's HDMI interface, and Windows will automatically identify the display function.

• Note:
• Some PCs do not support HDMI devices plug-and-play, usually after rebooting the system can be used normally.

Windows Touch Calibration

Take Windows 10 as an example:

• 1. Enter the Windows setting of the system, type in the search bar, and click "Calibrate the screen for pen or touch input" (as shown in the picture below):

• 2. Click "Setup" in the pop-up "Tablet PC Settings" interface:

• 3. The following text prompt will appear on the screen. Please tap the touch screen with your finger, and the computer will recognize it as a touch screen.

Working with Raspberry Pi

Hardware Connection

1. Use a 12V power supply to power the display POWER port.
2. Use the USB Type-C cable to connect the Touch port to the Raspberry Pi USB port.
3. Use the HDMI cable to connect the mini HDMI port to the Raspberry Pi HDMI port.

Software Setting

Raspberry Pi OS / Ubuntu / Kali and Retropie systems are supported for Raspberry Pi.
When the LCD works on these systems of Raspberry Pi, the resolution must be set manually, otherwise, it will result in incorrect display resolution and affect the experience.

1. Please download the newest image from the Official Raspberry Pi website.
2. Download the compressed file on the PC and unzip it to get the .img file.
3. Connect the TF card to the PC and use SDFormatter to format the TF card.
4. Open Win32DiskImager, choose the image prepared in the first step, and click "Write" to program the system image.
5. After programming, open the config.txt file in the root directory of the TF card and enter the following codes at the end of config.txt. Then, save and safely eject the TF card.

hdmi_group=2
hdmi_mode=82
hdmi_cvt 1920 1080 60 6 0 0 0

6. Insert the TF card into the Raspberry Pi, power up the Raspberry Pi, wait for a few seconds normally and then it will display normally.

Dimensions

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com