Following your instructions I end up with a boot loop after flashing the astronaut sample:
02:53:53.110 -> ELF file SHA256: 6d78fd7cb
02:53:53.110 ->
02:53:53.210 -> Rebooting...
02:53:53.210 -> ⸮⸮⸮ESP-ROM:esp32s3-20210327
02:53:53.210 -> Build:Mar 27 2021
02:53:53.210 -> rst:0xc (RTC_SW_CPU_RST),boot:0x8 (SPI_FAST_FLASH_BOOT)
02:53:53.210 -> Saved PC:0x4037b61a
02:53:53.210 -> SPIWP:0xee
02:53:53.243 -> mode:DIO, clock div:1
02:53:53.243 -> load:0x3fce2820,len:0x1188
02:53:53.243 -> load:0x403c8700,len:0x4
02:53:53.243 -> load:0x403c8704,len:0xbf0
02:53:53.243 -> load:0x403cb700,len:0x30e4
02:53:53.243 -> entry 0x403c88ac
02:53:53.607 -> Guru Meditation Error: Core 1 panic'ed (StoreProhibited). Exception was unhandled.
02:53:53.673 ->
02:53:53.673 -> Core 1 register dump:
02:53:53.673 -> PC : 0x42007970 PS : 0x00060b30 A0 : 0x82001e49 A1 : 0x3fcb5d30
02:53:53.673 -> A2 : 0x3fc9ce0c A3 : 0x3fcb1e30 A4 : 0x3fcb5cd8 A5 : 0x00000001
02:53:53.673 -> A6 : 0x00000000 A7 : 0x3fcb5ea8 A8 : 0x00000010 A9 : 0x08000000
02:53:53.673 -> A10 : 0x3fca5db8 A11 : 0x019bfcc0 A12 : 0x3fcb0001 A13 : 0x00000000
02:53:53.706 -> A14 : 0x3fca6d1c A15 : 0x019bfcc0 SAR : 0x0000000e EXCCAUSE: 0x0000001d
02:53:53.706 -> EXCVADDR: 0x00000010 LBEG : 0x40056f5c LEND : 0x40056f72 LCOUNT : 0xffffffff
02:53:53.706 ->
02:53:53.706 ->
02:53:53.706 -> Backtrace: 0x4200796d:0x3fcb5d30 0x42001e46:0x3fcb5d60 0x420d90a5:0x3fcb5d80 0x42018e81:0x3fcb5db0 0x42019711:0x3fcb5e80 0x4202c9ea:0x3fcb5ed0 0x42002776:0x3fcb5f00 0x4200552f:0x3fcb5f20 0x4203a273:0x3fcb5f50 0x4037f2ba:0x3fcb5f70
02:53:53.739 ->
Hello, please try changing the tools configuration of your Arduino IDE as shown in the picture.