non capisco il perche non riesca a caricare il file demo , ho inserito in libraries arduino le due cartelle ESP32-audioI2S-master e lvgl , instalalto esp32 di Espressif Systems impostato la scheda come nella guida , copiaot la cartella dell'esempio LVGL_Arduino trascino all interno del software arduino ide , compilo e compaiono molti errori qiesti sopono i primi che vengono fuori ed i file e' lunghissimo ,
In file included from C:\Users\marco\Documents\Arduino\LVGL_PULITO\LVGL_PULITO.ino:1:
C:\Users\marco\Documents\Arduino\LVGL_PULITO\LVGL_Driver.h: In function 'void setup()':
C:\Users\marco\Documents\Arduino\LVGL_PULITO\LVGL_Driver.h:9:3: error: 'TCA9554PWR_Init' was not declared in this scope
9 | TCA9554PWR_Init(0x00);
| ^~~~~~~~~~~~~~~
C:\Users\marco\Documents\Arduino\LVGL_PULITO\LVGL_Driver.h:10:13: error: 'EXIO_PIN2' was not declared in this scope
10 | Mode_EXIO(EXIO_PIN2, Low);
| ^~~~~~~~~
C:\Users\marco\Documents\Arduino\LVGL_PULITO\LVGL_Driver.h:10:13: note: the macro 'EXIO_PIN2' had not yet been defined
In file included from C:\Users\marco\Documents\Arduino\LVGL_PULITO\Touch_SPD2010.h:5,
from C:\Users\marco\Documents\Arduino\LVGL_PULITO\LVGL_PULITO.ino:2:
C:\Users\marco\Documents\Arduino\LVGL_PULITO\TCA9554PWR.h:19: note: it was later defined here
19 | #define EXIO_PIN2 2
|
C:\Users\marco\Documents\Arduino\LVGL_PULITO\LVGL_Driver.h:10:24: error: 'Low' was not declared in this scope
10 | Mode_EXIO(EXIO_PIN2, Low);
| ^~~
C:\Users\marco\Documents\Arduino\LVGL_PULITO\LVGL_Driver.h:10:24: note: the macro 'Low' had not yet been defined
C:\Users\marco\Documents\Arduino\LVGL_PULITO\TCA9554PWR.h:16: note: it was later defined here
16 | #define Low 0
|
C:\Users\marco\Documents\Arduino\LVGL_PULITO\LVGL_Driver.h:10:3: error: 'Mode_EXIO' was not declared in this scope
10 | Mode_EXIO(EXIO_PIN2, Low);
| ^~~~~~~~~
C:\Users\marco\Documents\Arduino\LVGL_PULITO\LVGL_Driver.h:11:3: error: 'Set_EXIO' was not declared in this scope
11 | Set_EXIO(EXIO_PIN2, Low);
| ^~~~~~~~
C:\Users\marco\Documents\Arduino\LVGL_PULITO\LVGL_Driver.h:13:23: error: 'High' was not declared in this scope
