• sales

    +86-0755-88291180

Luckfox Pico 【Tutorial】【RJ45 Ethernet Network Port Module 】

Step1】 Download SDK.:

Enter the following command in Ubuntu.

sudo git clone https://github.com/LuckfoxTECH/luckfox-pico.git

After downloading, enter the command "cd ./luckfox-pico" to enter the luckfox-pico folder.



Step 2】Modify the GMAC parameters in the rv1103g-luckfox-pico.dts file.

Edit the rv1103g-luckfox-pico.dts file in sudo nano luckfox-pico/sysdrv/source/kernel/arch/arm/boot/dts.


Change the parameters of &gmac.


Step 3】One-click automatic compilation:

sudo build.sh

Select option 0 to compile pico-related images.


Step 4】Write the compiled image to the SD card:


Step 5】Verify the use of the RJ45 module with Pico:

Enter "ifconfig" on Pico to check the IP address of eth0.


Other】Use ADB to connect to Pico via network IP:


TAG: ESP32-S3 1.43inch AMOLED Display AI Development Board 466×466 1.43 inch TouchScreen Deepseek TTL UART To CAN Mini Modbus POE ETH Relay Waveshare User Guide Raspberry Pi Compute Module 4 CM4 PCIe to M.2 NVMe SSD luckfox-pico-ultra-w-gpio Use Arduino Thermal imaging JETSON NANO MINI Expansion Board Jetson Nano 1.3inch LCD RP2040-PiZero Game ST7789 Raspberry Pi Pico LCD Display Screen Industrial ESP32-S3 Relay 8-Channel 8-Ch ESP32-WROOM IOT WiFi Bluetooth HAT For Arduino Raspberry Pi 15.6 inch FHD Monitor (C) LCD 1080P Capacitive TouchScreen Display Type-C/HDMI For Computer PC Raspberry Pi 0.96inch RGB OLED Raspberry Pi Camera Circular LCD Screen CSI Camera E-Paper Font Tutorial UGV Rover ROS2 PT AI OpenCV Robot Car MediaPipe For Jetson Orin Nano Raspberry Pi 5 PD Activation How to Use Product ROS2 SpotPear