【Note】

[] Do not include Raspberry Pi and STM32 boards

【Overview】

[] This product is a 1.54-inch OLED module, a built-in SSD1309 driver chip, using the SPI/I2C interface communication, provides Raspberry Pi, Arduino, STM32, ESP32, Jetson Nano, and other demo information.

【Feature】

[] Onboard voltage translator, compatible with 3.3V / 5V MCUs

[] Adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate

[] Comes with online development resources (examples for Raspberry Pi/Arduino/STM32/ESP32/Jetson Nano)

【Specifications】

[] OPERATING VOLTAGE: 3.3V / 5V

[] COMMUNICATION INTERFACE: SPI / I2C

[] DRIVER: SSD1309

[] RESOLUTION: 128 × 64 pixels

[] PIXEL SIZE: 0.254 × 0.254(mm)

[] DISPLAY SIZE: 35.05 × 17.52mm

[] MODULE SIZE: 43 × 37.5(mm)

[] DISPLAY COLOR:

[] 1.54inch OLED Module: White

[] 1.54inch OLED Module (B): Blue

【Version Options】

[] 1.54inch OLED Module: White

[] 1.54inch OLED Module (B): Blue

【Control Interface】

[] VCC : Power (3.3V / 5V input)

[] GND : Ground

[] DIN : Data input

[] CLK : Clock input

[] CS : Chip selection, low active

[] DC : Data/Command selection (high for data, low for command)

[] RST : Reset, low active

【Hardware Connection】

[] Connecting With Raspberry Pi Via SPI Interface

[] Connecting With Arduino Board Via SPI Interface

【Usage Example】

[] for reference only, the STM32 board is NOT included.

【Outline Dimensions】

[] OPTIONS 1.54inch OLED Module x1

[] GH1.25 7PIN cable x1

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com