Raspberry Pi 1.54inch Game LCD User Guide

Introduction

The 1.54inch lcd work with Raspberry Pi zero/zero 2/3B/4B/CM4, Support Raspbian and Retropie

Operating voltage: 3.3V
Interface: SPI
LCD type: TFT
Display Controller: ST7789V
Touch Controller: XPT2046(The Retropie OS don't support touch)
Resolution: 240*240 （software 480x480）

Use our pre-configured Images

->Raspbian

1.54inch-LCD-Raspios-Bookworm-240315_240615.zip(Work for All Pi' Version)
1.54inch-LCD-Raspios-buster-211202_211210.zip(Not work for Pi5)
1.54inch-LCD-Raspios-bullseye-211030_211210.zip(Not work for Pi5)

->Retropie (Not work for Pi5)

Install the driver at yourself image

->Work with Retropie (Not work for Pi5)

Display configuration tutorial ：

fbcp-9341:higher fps or device tree:higher compatibility

Joystick configuration tutorial
Audio configuration tutorial (Need to buy extra GPIO audio module )
Game Full screen setting

->Work with Raspbian-Bookworm ( Work For All Pi' Version)

Display configuration tutorial (Bookworm Lite For All Pi' Version )
Display configuration tutorial (Bookworm Desktop For Pi4 & Pi5 )
KEY CODE

->Work with Raspbian-Old buster&bullseye (Not work for Pi5)

Display configuration tutorial
Touch configuration tutorial
Touch calibration tutorial
Audio configuration tutorial (Need to buy extra GPIO audio module )
KEY CODE

ROMs

rom-500.zip (Other game roms , unzip it and copy it to nes folder )

700in1.zip (Just copy it to nes folder not need unzip it )

Driver , Code and configuration files

Software

Chip manual

Schematic

1.54inch LCD_Schematic

Size file

Pinout

See Pinout from here

ROMs

rom-500.zip (Other game roms , unzip it and copy it to nes folder )

700in1.zip (Just copy it to nes folder not need unzip it )

Driver , Code and configuration files

Images

->Raspbian

->Retropie

Software

Chip manual

Schematic

1.54inch LCD_Schematic

Size file

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： CM4 OpenWrt Tutorial ESP32 S3 Development Board 2.8 inch Round LCD Display 480x480 QMI8658 Sensor / SD /MP3 Audio /Battery Port LVGL/HMI For Arduino Pi5 Raspberry Pi Camera Module 3 Sensor Assembly IMX708 Official Original 11.9MP Camera 1.69inch LCD TouchScreen Display 240×280 ST7789 Arduino Raspberry Pi ESP32S3 Pico STM32 DeepSeek AI Voice Chat ESP32 C6 Development Board 1.69 inch LCD Display 240x280 1.69inch TouchScreen Programmable Watch 0.85inch Screen 3D Display JETSON NANO MINI Expansion Board Raspberry Pi 5inch Display Servo PWM motor WP5320 WP5335 35/20KG.CM 180° PWM digital servo double ball bearings Raspberry Pi Pico 2 RP2350 With 0.96 inch LCD Display 0.96inch Screen 160×80 Onboard RP2350A Jetson Orin 5G/4G/3G expansion board GNSS GPS SIM8260G-M2 SIM8262E-M2 Industrial USB TO RS232/485 (C) UART FT232RNL 2m For 3.3V / 5V For Switchable RS232/RS485 Raspberry Pi 1.5inch LCD Tang-Nano-20K-FPGA-Unboxing Arduino MEGA2560 R3 ESP32 S3 Development Board 1.43 inch AMOLED Display 1.43inch TouchScreen For Arduino LVGL With SD-Port/ QMI8658C 6-Axis Sensor Development Board ESP32-S3 LCD Driver Board RGB/SPI N8R8 For 2.1/2.8/4inch Captive TouchScreen Display Round

Raspberry Pi Game zero 2W/2B/3B+/4B 1.54inch mini LCD touchscreen

->Raspbian
->Retropie (Not work for Pi5)

Install the driver at yourself image

->Work with Retropie (Not work for Pi5)
->Work with Raspbian-Bookworm ( Work For All Pi' Version)
->Work with Raspbian-Old buster&bullseye (Not work for Pi5)

ROMs
Driver , Code and configuration files
Software
Chip manual
Schematic
Size file
Pinout