| Account | My Orders
Cart(0)
Spotpear
  • sales

    +86-0755-88291180

Raspberry Pi Servo Driver HAT (B), 16 Channel, 12 bit, I2C
Raspberry Pi Servo Driver HAT (B), 16 Channel, 12 bit, I2C
Raspberry Pi Servo Driver HAT (B), 16 Channel, 12 bit, I2C
Raspberry Pi Servo Driver HAT (B), 16 Channel, 12 bit, I2C
Raspberry Pi Servo Driver HAT (B), 16 Channel, 12 bit, I2C

Raspberry Pi Servo Driver HAT (B), 16 Channel, 12 bit, I2C

$20.89

Brand：Spotpear
SKU：0102025
Date：2020-08-03 18:49
Part Number：
Servo-Driver-HAT-(B)
No：
- +
In Stock
Add to cart
Ask a Question


Needless to say, the Raspberry Pi is powerful enough in most cases, yet it's not that good at providing precise PWM output. You may have tried to control a robotic arm or a hexapod walker by using the Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver HAT for you.

Note: Raspberry Pi and servos are NOT included.

Features

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • I2C controlled, using only 2 pins
  • Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales)
  • Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal
  • Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc.
  • Reserved I2C control pins, allows to work with other control boards
  • Comes with development resources and manual (examples in python like Bluetooth/WiFi remote control)

Specifications

  • Power supply: 5V (Pi connector) OR 6V~12V (VIN terminal)
  • Servo voltage: 5V
  • Logic voltage: 3.3V
  • Driver: PCA9685
  • Control interface: I2C
  • Dimension: 65mm x 30mm
  • Mounting hole size: 3.0mm

Supported Servo

This HAT can be used to drive servos such as:

  • SG90 Servo
  • MG90S Servo
  • MG996R Servo

Dimensions



TAG： RS485 to Ethernet Raspberry Pi 5 USB Monitor Pi5 Active Cooler Black ESP32-S3FH4R2 Matrix 8x8 RGB-LED-WiFi Bluetooth QST Attitude Gyro Sensor QMI8658C Arduino Python 1.5inch LCD SpotPear Screen For Jeston ESP32-S3 A7670E 4G development board supports LTE Cat-1/2G/GNSS positioning/WiFi/Bluetooth LPWA LoRa Antenna 2dBi gain 433/868MHz ESP32 ESP32 S3 N8R8 ST7789 2.8inch LCD Captive TouchScreen Display 240x320 JETSON NANO MINI IO BASE Board Raspberry Pi 3 LCD HAT Raspberry Pi 5 Official Case Active Cooler Raspberry Pi 5 Audio Jack Raspberry Pi 5 802.3af MLX90641
Forum：
1、LuckFox Pico Mini A creat SD Failed update is not exist in partition table
2、SIM8200-M2_5G_HAT_source code Raspberry Pi 5G DONGLE Expansion Board
3、Milk-V-Duo Arduino sketch x linux communication
4、Copy of built-in program showing location/temp/time
5、Volumio Problem Touch with Raspberry Pi 4inch HDMI LCD 720×720

Recommended For You

$16.89

2.66inch-e-Paper-Module-(B)

2.66inch E Paper E Ink Display Module (B), 296×152, Red / Black / White, SPI
$4.89

Pico-4DIG-8SEG-LED-Module

Raspberry Pi Pico 4 digit 8 segment Display Module LED Digital tube Display Module Parallel port
$12.9

Pi5-PCIe-Standard-Slot-Adapter

Raspberry Pi 5 PCIe FFC Connector to Standard PCIe x1 Slot Expansion Board
$28.63

UGV-Suspension-(A)

All-metal compact UGV suspension high-strength Spring 7.5KG load For DDSM115 hub motor
©Copyright 2015 Berlinger Haus | All Rights Reserved
Address：Rm401, building 4, Enlai industrial city, Nankang Road, Danzhutou community, Nanwan street, Longgang District, Shenzhen
Email：services01@spotpear.com (Only tech support .Order see 'CONTACT US' at our web )