• sales

    +86-0755-88291180

Barcode Scanner Module (C) User Guide

Note

The Barcode Scanner Module (C) and the Barcode Scanner Module use the same scheme and the setup codes and commands are compatible, so they share the same user manual.

Document

Software

FAQ

Question:When using command trigger mode, can I disable the answer message of the trigger command?

 Answer:
You can replace the trigger instruction with 0x16 0x54 0x0D
TAG: EC200U C4-P01 Development Board QuecPython LTE Cat-1 Bluetooth GNSS Positioning ESP32-S3 AI Electronic Eye Development Doard DualEye TouchEye 1.28 inch TouchScreen LCD Round Display N16R8 Toy Doll Robot 4.26inch-e-Paper ESP32 UART USB Bus Servo ST RSBL Driver board For Raspberry PI Robot Raspberry Pi 7.5 inch e-Paper link (H) RYBW 800x480 For Arduino / Jetson Nano / STM32 ESP32 1.5inch LCD Raspberry Pi Pico Raspberry Pi 5 DSI Bookworm Allwinner H618 Raspberry Pi 5inch Display 1024x600 HDMI Capacitive TouchScreen 5 inch LCD B Wide-Cover For Mini PC ESP32-C6 Geek 1.14inch Development Board with 1.14 inch 65K Color LCD XIAO-nRF52840 Plus 20GPIOs BLE Sense Tiny SuperMini Onboard Mic/Sensor For Arduino For SeeedStudio RV1106 SC3336 Luckfox Pico ST7789 Intel BE200 Wireless WLAN Card Gigabit Tri-Band WiFi7 Bluetooth 5.4 M.2 MU-MIMO IEEE 802.11 Raspberry Pi User Guide Raspberry Pi DS3231 ESP32 S3 Development Board 1.64 inch AMOLED Display 1.64inch TouchScreen For Arduino LVGL With SD-Port/ QMI8658C 6-Axis Sensor Raspberry Pi WatchDog Arduino IR Thermal Imaging Camera