USB/RS232/RS485/TTL Converter User Guide

Overview

The Multibus Converter is an industrial-grade isolated converter that supports USB / RS232 / TTL to RS232 / 485 / TTL, with built-in power supply isolation, digital isolation, and protection circuits like TVS diode. It is easy to use and suitable for industrial control equipment or applications with high communication requirements.

Feature

Adopts original FT232RL for USB communication, fast communicating, stable and reliable, better compatibility.
Onboard over-voltage, over-current protection circuits (there's no protection between the two power supplies of the host terminal).
Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal.
Onboard unibody digital isolation, for isolating the signal, reliable and jam-proof, low power consumption.
Onboard TVS (Transient Voltage Suppressor), effectively suppresses surge voltage and transient spike voltage in the circuit, lightning proof & anti-electrostatic.
Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, and improves shock resistance.
Onboard TTL serial port 3.3V and 5V voltage level switch, allows the user to select the TTL level of the Group B terminal.
Aluminium alloy enclosure with oxidation dull-polish surface, solid and durable.

Specification

PRODUCT TYPE	Industrial Isolated Multi-bus USB/RS232/RS485/TTL Converter
DATA RATE	300 ~ 921600bps 300 ~ 600000bps (RS232 to RS232)
GROUP A	USB	Operating voltage	5V
		Connector	USB-B
		Protection	200mA resettable fuse, isolated output
	RS232	Connector	DB9 male
		Protection	TVS protection, surge-suppress, ESD protection
		Transmission mode	point-to-point
	TTL (UART)	Operating voltage	5V
		Connector	Screw terminal
		Pinout	TXD, RXD, GND, 5V
		Protection	clamping protection diode, over-voltage protection, reverse-proof, shock-resistance, jamproof
GROUP B	RS485	Connector	Screw terminal
		Pinout	A+, B-, GND
		Direction control	Hardware auto control
		Protection	lightningproof, surge-suppress, ESD protection
		Transmission mode	point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more)
	RS232	Connector	DB9 male
		Protection	TVS protection, surge-suppress, ESD protection
		Tranmission mode	point-to-point
	TTL (UART)	Operating voltage	3.3V/5V
		Connector	Screw terminal
		Pinout	TXD, RXD, GND
		Protection	clamping protection diode, over-voltage protection, reverse-proof, shock-resistance, jamproof
OPERATING ENVIRONMENT	Temperature
OPERATING ENVIRONMENT	Humidity	5%RH ~ 95%RH
OS SUPPORT	Windows 11 / 10 / 8.1 / 8 / 7 / XP
NOTE	only one pair of devices will be matched for a complete communication between the Group A and Group B terminals at the same time

Note: A pad for 120R terminal resistor is reserved for the RS485 port, users can add the resistor to the begin/terminal devices if connect multiple devices.

Install driver

Generally, after connecting to the computer, the system will automatically prompt to install the driver. If the device cannot communicate normally after connecting to the device, And if the device has a yellow exclamation mark in the device manager, you need to manually install the driver.

Download the Driver
- FT232 Driver
unzip the driver and double-click the exe file to install the driver.

Pinout of RS232

Software

Datasheet

FT232R

Question:System other than Windows that cannot use USB to communicate?

Answer:

If you encounter a system other than Windows that cannot use USB to communicate normally, you can go to the official website link below, install the corresponding system driver and use it: https://www.ftdichip.cn/Drivers/D2XX.htm

Question:Does USB communication support Linux system?

Answer:

Yes, it supports Win7/8/8.1/10, Mac, Linux, Android, WinCE, and so on.

Question:What should I do if the RS485 short-range communication is abnormal?

Answer:

Remove the 120-ohm termination matching resistor from RS485.

Question:Does it support the communication between the A-side and the A-side, and the B side and the B side?

Answer:

Not supported, A side can only communicate with B side, B side can only communicate with A side

Question:How to supply power to the module, and what is the supply voltage?

Answer:

It can be powered through the TTL power interface on the A side, the USB-B data line interface, and the PWR power supply (outer diameter 5.5 inner diameters 2.1) interface, and you can choose one of the three; the power supply voltage is 5V. When the PWR power interface is selected for power supply, the TTL power interface of the A end can supply power to the outside

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： D-Robotics RDK X3 Module Core MD Module Horizon Sunrise Pi ARM Cortex-A53 5Tops Size Compatible With Raspberry Pi CM4 Size UART TTL To RS485 C Built-In Protection Circuits Raspberry Pi Thermal imaging camera Raspberry Pi 4 USB Audio 1.3inch LCD RP2040-PiZero Game ST7789 Raspberry Pi Pico LCD Display Screen 1.3inch LCD ESP32-P4-WIFI6 4.3inch LCD Display AI Development Board 480×800 4.3 inch TouchScreen Deepseek Pi5-Active-Cooler-C FLASH File System Operation X1301 Raspberry Pi 5 HDMI to CSI-2 Shield 1080P@60fps & Audio & Video Also For 4B/3B Aluminum Heatsink Robotic Arm Control Raspberry Pi 5 inch LCD 720x1280 Capacitive TouchScreen Display HDMI For Jetson Nano/mini Computer PC Raspberry Pi 5 Camera Arduino MLX90640 Raspberry Pi DSI display Sipeed NanoCluster Mini Cluster Board mini data center For Raspberry Pi CM45 / Computer /LM3H /M4N Arducam 64MP Camera Serial UART Bus Servo ST3215 30KG.CM/19.5KG.CM Magnetic Encoder 360° High Precision And Large Torque Raspberry Pi Pico 1.14inch LCD

Price：

Stop production

Model：

USB/RS232/RS485/TTL-Converter

Industrial grade USB/RS232/TTL To RS232/485/TTL Isolated Multibus Converter

TAG： MP1G POE RTL8111 Raspberry Pi 5 PCIe 1G Gigabit Ethernet HAT Pi5 Raspber Pi 5 5V5A Power ESP32-P4-NANO RISC-V WiFi6 MIPI CSI Camera 10.1 inch DSI Display USB RJ45 Ethernet POE Audio Buzzer Luckfox Pico Ethernet GC2083 RS485 Interface ESP32 S3 3.5 inch LCD 480x320 Display Capacitive TouchScreen PC Tablet MP3 Video Player Weather Clock JC3248W535 LVGL Raspberry Pi A7670E LTE Cat-1 2G GSM GPRS LBS 3.52 inch e Paper HAT B E Ink 360x240 Screen Display Arduino Raspberry Pi Jetson Nano STM32 Raspberry Pi PICO Raspberry Pi Zero UPS 26650 Li-Battery EyeLink-RC-S1 Industrial Edition FPV Drone ground station image transmission remote control spotpear Raspberry Pi 5 PCIe to M.2 NVMe SSD ESP32-S3 IR Infrared Thermal Imaging Camera B Arduino UNO R4 Minima Raspberry Pi 64MP Camera Raspberry Pi CM5 Gigabit Ethernet Port Industrial Computer with RJ45 Aluminum Alloy Radiating Cas ESP32 S3 Round 2.1 inch LCD Knob Rotary Display Flipper Zero WiFi multiboard NRF24+ESP32